Thanks, but that file does not help, it is for a different computer and video card altogether.
> em..and the file is here :) > > ### BEGIN DEBCONF SECTION > # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the > # Debian X Configuration tool, using values from the debconf database. > # > # Edit this file with caution, and see the XF86Config-4 manual page. > # (Type "man XF86Config-4" at the shell prompt.)n > # > # If you want your changes to this file preserved by dexconf, only make > changes > # before the "### BEGIN DEBCONF SECTION" line above, and/or after the > # "### END DEBCONF SECTION" line below. > > Section "Files" > FontPath "unix/:7110" # local X-TT font server > FontPath "unix/:7100" # local font server > # if the local font server has problems, we can fall back on these > # FontPath "/usr/lib/X11/fonts/misc" > # FontPath "/usr/lib/X11/fonts/cyrillic" > # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > # FontPath "/usr/lib/X11/fonts/Type1" > # FontPath "/usr/lib/X11/fonts/Speedo" > # FontPath "/usr/lib/X11/fonts/100dpi" > # FontPath "/usr/lib/X11/fonts/75dpi" > # FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID" > # FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType" > EndSection > > Section "Module" > Load "GLcore" > Load "bitmap" > Load "dbe" > Load "ddc" > Load "dri" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "pex5" > Load "record" > Load "speedo" > Load "type1" > Load "vbe" > Load "xie" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "us_intl" > # Option "XkbModel" "macintosh" > # Option "XkbLayout" "us" > # Option "XkbLayout" "pt_BR" > # Option "xkb_symbols" "deadkeys" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/input/mice" > Option "Protocol" "ImPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Device" > Identifier "Apple PowerBook G4" > Driver "ati" > Option "UseFBDev" > EndSection > > Section "Monitor" > Identifier "Apple PowerBook G4 Widescreen" > HorizSync 30-100 > VertRefresh 50-160 > Option "DPMS" > Option "ForceCRT2Type" "SVIDEO" > Option "TVStandard" "PAL" > Modeline "1152x768" 64.995 1152 1213 1349 1472 768 771 777 806 -HSync -VSync > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "Apple PowerBook G4" > Monitor "Apple PowerBook G4 Widescreen" > DefaultDepth 16 > SubSection "Display" > Depth 1 > Modes "1152x768" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1152x768" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1152x768" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1152x768" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1152x768" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1152x768" > EndSubSection > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > EndSection > > Section "DRI" > Mode 0666 > EndSection > > ### END DEBCONF SECTION > > You --> Daniel Weinstein <[EMAIL PROTECTED]> ,were going on about --> > >> I have a Power Mac G4 400mHz AGP, with an ATI Rage 128 Pro Video card. >> It is connected to a Planar CT1904Z LCD display, through the DVI port. >> >> I've installed debian unstable with XFree86 Version 4.3.0.1 >> >> Any time I try to load the Xserver either by GDM or manually, it crashes and >> gives me an error dialog. Does anyone have a working configuration or know >> how I can get mine working? >> >> Below are excerpts from my etc/X11/XF86Config-4 and /var/log/XFree86.0.log >> Let me know if I should post the whole config file or log. >> >> <clip> >> >> Section "Device" >> Identifier "ATI Rage 128 Pro" >> Driver "ati" >> EndSection >> Section "Monitor" >> Identifier "Planar CT1904Z" >> HorizSync 30-80 >> VertRefresh 50-75 >> # Option "DPMS" >> EndSection >> Section "Screen" >> Identifier "Default Screen" >> Device "ATI Rage 128 Pro" >> Monitor "Planar CT1904Z" >> DefaultDepth 24 >> SubSection "Display" >> Depth 1 >> Modes "1280x1024" "800x600" "640x480" >> EndSubSection >> SubSection "Display" >> Depth 4 >> Modes "1280x1024" "800x600" "640x480" >> EndSubSection >> SubSection "Display" >> Depth 8 >> Modes "1280x1024" "800x600" "640x480" >> EndSubSection >> SubSection "Display" >> Depth 15 >> Modes "1280x1024" "800x600" "640x480" >> EndSubSection >> SubSection "Display" >> Depth 16 >> Modes "1280x1024" "800x600" "640x480" >> EndSubSection >> SubSection "Display" >> Depth 24 >> Modes "1280x1024" "800x600" "640x480" >> EndSubSection >> EndSection >> Section "ServerLayout" >> Identifier "Default Layout" >> Screen "Default Screen" >> InputDevice "Generic Keyboard" >> InputDevice "Configured Mouse" >> EndSection >> Section "DRI" >> Mode 0666 >> EndSection >> >> >> >> >> <clip> >> >> XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-4 20040529030435 >> >> <clip> >> >> (WW) Open APM failed (/dev/apm_bios) (No such file or directory) >> >> <clip> >> >> (II) ATI: ATI driver (version 6.5.5) for chipset: ati >> (II) R128: Driver for ATI Rage 128 chipsets: >> <clip> >> >> (II) Primary Device is: PCI 00:10:0 >> (II) ATI: Candidate "Device" section "ATI Rage 128 Pro". >> (--) Assigning device section with no busID to primary device >> (--) Chipset ATI Rage 128 Pro GL PF (AGP) found >> (II) Loading sub module "r128" >> (II) LoadModule: "r128" >> (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o >> (II) Module r128: vendor="The XFree86 Project" >> compiled for 4.3.0.1, module version = 4.0.1 >> Module class: XFree86 Video Driver >> ABI class: XFree86 Video Driver, version 0.6 >> >> <clip> >> >> (II) Setting vga for screen 0. >> (II) Loading sub module "vgahw" >> (II) LoadModule: "vgahw" >> (II) Loading /usr/X11R6/lib/modules/libvgahw.a >> (II) Module vgahw: vendor="The XFree86 Project" >> compiled for 4.3.0.1, module version = 0.1.0 >> ABI class: XFree86 Video Driver, version 0.6 >> (II) R128(0): PCI bus 0 card 16 func 0 >> (**) R128(0): Depth 24, (--) framebuffer bpp 32 >> (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) >> (==) R128(0): Default visual is TrueColor >> (==) R128(0): RGB weight 888 >> (II) R128(0): Using 8 bits per RGB (8 bit DAC) >> (II) Loading sub module "int10" >> (II) LoadModule: "int10" >> (II) Reloading /usr/X11R6/lib/modules/libint10.a >> (II) R128(0): initializing int10 >> (II) R128(0): No legacy BIOS found -- trying PCI >> (EE) R128(0): Cannot read V_BIOS (5) >> (--) R128(0): Chipset: "ATI Rage 128 Pro GL PF (AGP)" (ChipID = 0x5046) >> (--) R128(0): Linear framebuffer at 0x94000000 >> (--) R128(0): MMIO registers at 0x90000000 >> (--) R128(0): BIOS at 0x90020000 >> (--) R128(0): VideoRAM: 16384 kByte (64-bit SDR SGRAM 1:1) >> (**) R128(0): Using external CRT for display >> (WW) R128(0): Video BIOS not detected in PCI space! >> (WW) R128(0): Attempting to read Video BIOS from legacy ISA space! >> (WW) R128(0): Video BIOS not found! >> (WW) R128(0): Can't determine panel dimensions, and none specified. >> Disabling programming of FP registers. >> (II) R128(0): PLL parameters: rf=2950 rd=31 min=12500 max=25000; xclk=14000 >> (II) Loading sub module "ddc" >> (II) LoadModule: "ddc" >> (II) Reloading /usr/X11R6/lib/modules/libddc.a >> (==) R128(0): Using gamma correction (1.0, 1.0, 1.0) >> (II) Loading sub module "i2c" >> (II) LoadModule: "i2c" >> (II) Loading /usr/X11R6/lib/modules/libi2c.a >> (II) Module i2c: vendor="The XFree86 Project" >> compiled for 4.3.0.1, module version = 1.2.0 >> ABI class: XFree86 Video Driver, version 0.6 >> (II) R128(0): I2C bus "DDC" initialized. >> (II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0. >> (II) R128(0): I2C device "DDC:ddc2" removed. >> (EE) R128(0): No DFP detected >> (II) R128(0): Planar CT1904Z: Using hsync range of 30.00-80.00 kHz >> (II) R128(0): Planar CT1904Z: Using vrefresh range of 50.00-75.00 Hz >> (II) R128(0): Clock range: 12.50 to 250.00 MHz >> >> <clip> >> >> Fatal server error: >> Caught signal 7. Server aborting >> >> >> >> >> -- >> To UNSUBSCRIBE, email to [EMAIL PROTECTED] >> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >> >
