On Fri, Jun 04, 2004 at 05:49:56PM +0900, Jerome Walter wrote: > Jerome Walter wrote: > >Sven Luther wrote: > > >BTW, i found a kernel which is working quite fine on an rs/6000 page. > >The author patched it and made a perl script so that we could change the > >boot parameters with no difficulty and i have both serial and console > >working with this one. > >Page is http://www.solinno.co.uk/7043-140/downloads.php > > > >What parameters should i pass to go on to the cd installation ? > > > >Another solution should be to have a <1.4MB boot image, so that i could > >put it on floppy and specify console=ttyS0,tty0 as boot file/parameters. > >Is there any available "little" file ? > > Well, some more test results (i have to get it working...). > You latest netboot images give this: > prep and ofonly(floppy): "Now booting the kernel" (et puis pof... ;)
Comprend pas. Le ofonly c'est pour oldworld pmac seulement, je suis pas sur que ce soit une bonne idee de l'utiliser sur ta machine. Err, you also CCed debian-powerpc, so i go back to english. the floppy stuff is mostly for oldworld pmacs and miboot. you need the /powerpc/netboot/vmlinuz-prep.initrd, or if you can boot from cdrom, this would be even easier. > chrp-rs6k (yes, i tried even this one): -- \ > Message in OF console: > chrpboot starting : loaded at 0x00800000 > initial ramdisk moving 0x3e67000 <- 0x009ff000 (198585 bytes) > gunzipping 0x00010000 <- 0x009fead8 ... done 4435796 bytes > 50488 bytes of heap consumed, max in use 41448 > start address = 0x10000 > opening display /pci/[EMAIL PROTECTED] ... ok > copying OF device tree ... done > calling quiesce ... > returning 0x07477000 from prom_init There is not much chance this will work. > <private lang="fr"> > J'en ai mis du temps a remarquer le wanadoo.fr ;) > </private> hehe. Friendly, Sven Luther
