On Wed, 2004-04-21 at 14:58, Sebastian Henschel wrote: > hi folks.. > > hw: albook 15" > kernel: 2.6.5-rc3-ben0-mh3 (mh3 means latest bluetooth patches) > > today, i did a software update on OS X which brought a new firmware > (1.1) for the bluetooth device. this firmware should improve the behaviour of > bluetooth keyboards and mice. so far, under OS X, i can still talk to my > mobile phone. > now under linux, i do not have a device hci0 anymore and thus no > connection to my phone. the driver hci_usb loads just fine, but does not > generate the needed device. by chance, i found out, that the bluetooth > device claims to be something different than before in the list of USB > devices: > > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 44/900 us ( 5%), #Int= 2, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.5-rc3-ben0-mh3 ohci_hcd > S: Product=PCI device 106b:003f (Apple Computer Inc.) > S: SerialNumber=0001:01:1a.0 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=05ac ProdID=1000 Rev=12.41 > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=hid > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid > E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > > please note the device in lev 01. usbview says that Prot 01 and 02 are > keyboard and mouse protocols. interesting coincidence... > since i looked quite often into /proc/bus/usb/devices in the last days, > i strongly believe that the device had more interfaces back then. > could someone of you please send me the relevant part of your output of > /proc/bus/usb/devices? with that information, i hope to be able to persuade > hci_usb to treat this device as a bluetooth device again. though perhaps > i am completely misguided here... > > thanks, > sebastian
apple.com, on its "Bluetooth Firmware Updater 1.1": "Important: Applying this firmware updater to a D-Link USB to Bluetooth adapter will make it incompatible with non-Macintosh systems." <http://www.apple.com/support/downloads/bluetoothfirmwareupdater.html> Anybody out there who knows more on that in the meantime, i.e. is there already a fix for it, or workaround, or whatever? Or is there even someone out there with a working bluetooth on Linux ppc after upgrading the machine to the new Buetooth Firmware? Thanks in anticipation. Best Regards Wolfgang -- Profile, Links: http://profiles.yahoo.com/wolfgangpfeiffer
