Hello,
I apologize for cross-posting but I have sen
I am trying to boot and install debian on my MCP750.
I am having issues booting the initrd's that I have found on the debian
web-site.
I tried the cd installations and have been unsuccessful getting;
PPC1-Bug>pboot 14 50
Booting from: PBC-EIDEF1, Controller 14, Drive 50
Device Name : /[EMAIL PROTECTED]/pci1106,[EMAIL PROTECTED],1/[EMAIL PROTECTED]
Loading: Operating System
Bootable Partition Table Entry Not Found
PPC1-Bug>
I did find one initrd that almost worked (over the network off my tftpboot
machine). It was written by Sven Luther.
Here is my output...
Copyright Motorola Inc. 1988 - 1998, All Rights Reserved
PPC1 Debugger/Diagnostics Release Version 4.1 - 10/12/98 RM01
COLD Start
Local Memory Found =08000000 (&134217728)
MPU Clock Speed =367Mhz
BUS Clock Speed =67Mhz
WARNING: Keyboard Not Connected
Reset Vector Location : ROM Bank B
Mezzanine Configuration: Single-MPU
Current 60X-Bus Master : MPU0
Idle MPU(s) : NONE
System Memory: 128MB, ECC Enabled (ECC-Memory Detected)
L2Cache: 1024KB, 147Mhz
PPC1-Bug>niot
Controller LUN =00?
Device LUN =00?
Node Control Memory Address =07F9E000?
Client IP Address =192.168.1.108?
Server IP Address =192.168.1.103?
Subnet IP Address Mask =255.255.255.0?
Broadcast IP Address =192.168.1.255?
Gateway IP Address =192.168.1.1?
Boot File Name ("NULL" for None) =vmlinuz-prep2.initrd?
Argument File Name ("NULL" for None) =? .
PPC1-Bug>ioi
I/O Inquiry Status:
CLUN DLUN CNTRL-TYPE DADDR DTYPE RM Inquiry-Data
1 0 PC8477 0 $00 Y <None>
14 40 PBC-EIDEF1 4 $00 N IBM-DBCA -206480 A87F
14 50 PBC-EIDEF1 5 $05 Y TOSHIBA CD-ROM XM-1902B 1014
PPC1-Bug>nbo
Network Booting from: DEC21140, Controller 0, Device 0
Device Name: /[EMAIL PROTECTED]/pci1011,[EMAIL PROTECTED],0:0,0
Loading: vmlinuz-prep2.initrd
Client IP Address = 192.168.1.108
Server IP Address = 192.168.1.103
Gateway IP Address = 192.168.1.1
Subnet IP Address Mask = 255.255.255.0
Boot File Name = vmlinuz-prep2.initrd
Argument File Name =
Network Boot File load in progress... To abort hit <BREAK>
Bytes Received =&3277163, Bytes Loaded =&3277163
Bytes/Second =&234083, Elapsed Time =14 Second(s)
Residual-Data Located at: $07F88000
loaded at: 00005400 0032CFEC
relocated to: 00800000 00B27BEC
board data at: 07F88000 07F8EA0C
relocated to: 00B1E150 00B24B5C
zimage at: 0080C330 009A6BCA
initrd at: 009A7000 00B1D836
avail ram: 00400000 00800000
Linux/PPC load: console=ttyS0,9600n8
Uncompressing Linux...done.
Now booting the kernel
Memory BAT mapping: BAT2=128Mb, BAT3=0Mb, residual: 0Mb
Total memory = 128MB; using 256kB for hash table (at c0400000)
Linux version 2.4.25-powerpc ([EMAIL PROTECTED]) (version gcc 3.3.3 (Debian))
#1 je4
PReP architecture
On node 0 totalpages: 32768
zone(0): 32768 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600n8
OpenPIC Version 1.3 (2 CPUs and 16 IRQ sources) at effde000
OpenPIC timer frequency is 8.333838 MHz
time_init: decrementer frequency = 16.666686 MHz
Console: colour dummy device 80x25
Calibrating delay loop... 732.36 BogoMIPS
Memory: 123868k available (2328k kernel code, 1352k data, 208k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Scanning bus 00
Found 00:00 [1057/4801] 000600 00
Fixup res 1 (200) of dev 00:00.0: 3c000000 -> fc000000
Found 00:58 [1106/0586] 000601 00
Found 00:59 [1106/0571] 000101 00
Found 00:5a [1106/3038] 000c03 00
Found 00:5b [1106/3040] 000000 00
Found 00:70 [1011/0009] 000200 00
Fixup res 1 (200) of dev 00:0e.0: 3bffff00 -> fbffff00
PCI:00:0e.0 Resource 6 [fffc0000-ffffffff] is unassigned
Found 00:a0 [1011/0026] 000604 01
Fixups for bus 00
Scanning behind PCI bridge 00:14.0, config 010100, pass 0
Scanning bus 01
Fixups for bus 01
PCI: Unable to handle 64-bit address space for
Bus scan for 01 returning with max=01
Scanning behind PCI bridge 00:14.0, config 010100, pass 1
Bus scan for 00 returning with max=01
Setting PCI interrupts for a "Mesquite cPCI (MCP750)"
PCI: bridge rsrc 0..7fffff (100), parent c02ca1d8
resource conflict with: 3c0..3df (0), name: vga+
PCI: reparented vga+ [3c0..3df] under PCI host bridge
PCI: bridge rsrc c0000000..feffffff (200), parent c02ca1f4
PCI:00:00.0: Resource 1: fc000000-fc03ffff (f=200), vd: 1057, dev: 4801
PCI:00:0b.1: Resource 0: 0000fff0-0000fff7 (f=101), vd: 1106, dev: 0571
PCI:00:0b.1: Resource 1: 0000ffec-0000ffef (f=101), vd: 1106, dev: 0571
PCI:00:0b.1: Resource 2: 0000ffe0-0000ffe7 (f=101), vd: 1106, dev: 0571
PCI:00:0b.1: Resource 3: 0000ffdc-0000ffdf (f=101), vd: 1106, dev: 0571
PCI:00:0b.1: Resource 4: 0000ffc0-0000ffcf (f=101), vd: 1106, dev: 0571
PCI:00:0b.2: Resource 4: 0000ffa0-0000ffbf (f=101), vd: 1106, dev: 3038
PCI:00:0e.0: Resource 0: 0fffff00-0fffff7f (f=101), vd: 1011, dev: 0009
PCI: Cannot allocate resource region 0 of device 00:0e.0
PCI:00:0e.0: Resource 1: fbffff00-fbffff7f (f=200), vd: 1011, dev: 0009
PCI: moved device 00:0e.0 resource 0 (101) to 1000
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Thermal assist unit using timers, shrink_timer: 200 jiffies
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
initialize_kbd: Keyboard reset failed, no ACK
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ed
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Generic RTC Driver v1.07
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
tulip0: MII transceiver #1 config 3000 status 7809 advertising 01e1.
eth0: Digital DS21140 Tulip rev 34 at 0x1000, 00:01:AF:01:ED:47, IRQ 18.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:0b.1
VP_IDE: chipset revision 6
VP_IDE: bad irq (0): will probe later
PCI: Enabling bus mastering for device 00:0b.1
Oops: kernel access of bad area, sig: 11
NIP: C034543C XER: 20000000 LR: C01131B8 SP: C09A1EC0 REGS: c09a1e10 TRAP: 0300d
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000008, DSISR: 40000000
TASK = c09a0000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: 00000000 C09A1EC0 C09A0000 C03B7DB8 0000FFC0 00000001 C0380000 00000001
GPR08: 00000000 00010000 C03B7DB8 00000000 22000082 00000000 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 C0380000 00000000 F0000000 C09A1F08
GPR24: 00000000 00000000 00000000 00000000 C03F4400 C02DCA9A C02DCA7C C03B7DB8
Call backtrace:
C011332C C0103350 C0346104 C0346184 C0345F28 C0345F7C C0345FC8
C0329544 C0003FF0 C0008B40
Kernel panic: Attempted to kill init!
<0>Rebooting in 180 seconds..
Can someone point me in the correct direction?
--
-------
Rick...
