I know this has been discussed, recently. I read this thread: http://lists.debian.org/debian-powerpc/2004/debian-powerpc-200401/msg00111.html
but I now I am thouroughly confused, and I can't get anything working. I have a working accelerated XFree86 under 2.4 using a modified version of this : http://www.cattlegrid.net/~christophe/titanium/XF86Config-4 I changed the Modelines for my older titanium which has a resolution of 1152x768. My ATI chipset declares itself to be an ATI Rage Mobility M3 AGP I have tried modifiying this config (from recent thread) for my resolution: http://bobcat.edgewall.com/~jonas/powerbook/XF86Config-4 I have tried kernel 2.4 and 2.6.0-test11, with framebuffers and without, with radeonfb complied in, loaded as a module, not loaded, I can't figure out the combination I need to get this to work. I have tried only with the xserver-xfree86-dri-trunk package. Below is a bit of a compliation of the types of errors I am getting, as soon as someone points me in the right direction, perhaps the errors will be more meaningful, Thanks in advance, -- Marco *************************** all tests presented here: kernel 2.6 new config both devices Driver "radeon" no radeonfb kernel module *************************** XFree86 Version 4.3.99.12 (DRI trunk) Release Date: 10 September 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.6.0-test11-benh ppc [ELF] Current Operating System: Linux machina 2.6.0-test11 #8 Sun Jan 11 08:35:06 EST 2004 ppc Build Date: 04 December 2003 <snip...> (II) Loading /usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a Skipping "/usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a:m_debug_clip.o": No symbols found Skipping "/usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a:m_debug_norm.o": No symbols found Skipping "/usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a:m_debug_xform.o": No symbols found <snip...> (II) ATI: ATI driver (version 6.5.3) for chipset: ati (II) R128: Driver for ATI Rage 128 chipsets: <snip...> (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), <snip...> (II) Primary Device is: PCI 00:10:0 (EE) No devices detected. Fatal server error: no screens found *************************** modprobe radeonfb *************************** <snip...> (II) Primary Device is: PCI 00:10:0 (EE) No devices detected. Fatal server error: no screens found *************************** old used to work XF86config module radeonfb is in *************************** <snip...> (**) R128(0): Option "UseFBDev" (==) R128(0): RGB weight 565 (II) R128(0): Using 6 bits per RGB (8 bit DAC) (**) R128(0): Using framebuffer device (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules-dri-trunk/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.3.99.12, module version = 0.0.2 ABI class: XFree86 Video Driver, version 0.7 (WW) open /dev/fb1: No such device (WW) open /dev/fb2: No such device (WW) open /dev/fb3: No such device (WW) open /dev/fb4: No such device (WW) open /dev/fb5: No such device (WW) open /dev/fb6: No such device (WW) open /dev/fb7: No such device (EE) R128(0): Failed to open framebuffer device, consult warnings and/or errors above for possible reasons (you may have to look at the server log to see warnings) (II) UnloadModule: "ati" (II) UnloadModule: "fbdevhw" (II) Unloading /usr/X11R6/lib/modules-dri-trunk/linux/libfbdevhw.a (II) UnloadModule: "vgahw" (II) Unloading /usr/X11R6/lib/modules-dri-trunk/libvgahw.a (II) UnloadModule: "r128" (II) Unloading /usr/X11R6/lib/modules-dri-trunk/drivers/r128_drv.o (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found *************************** module radeonfb is out *************************** <same> (WW) open /dev/fb2: No such device (WW) open /dev/fb3: No such device (WW) open /dev/fb4: No such device (WW) open /dev/fb5: No such device (WW) open /dev/fb6: No such device (WW) open /dev/fb7: No such device (EE) R128(0): Failed to open framebuffer device, consult warnings and/or errors above for possible reasons (you may have to look at the server log to see warnings) (II) UnloadModule: "ati" (II) UnloadModule: "fbdevhw" (II) Unloading /usr/X11R6/lib/modules-dri-trunk/linux/libfbdevhw.a (II) UnloadModule: "vgahw" (II) Unloading /usr/X11R6/lib/modules-dri-trunk/libvgahw.a (II) UnloadModule: "r128" (II) Unloading /usr/X11R6/lib/modules-dri-trunk/drivers/r128_drv.o (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found *************************** remove Option "UseFBDev" *************************** (EE) R128(0): Cannot read V_BIOS (5) (--) R128(0): Chipset: "ATI Rage 128 Mobility M3 LF (AGP)" (ChipID = 0x4c46) (--) R128(0): Linear framebuffer at 0xb4000000 (--) R128(0): MMIO registers at 0xb0000000 (--) R128(0): BIOS at 0xb0020000 (--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1) (**) R128(0): Using flat panel for display (WW) R128(0): Video BIOS not detected in PCI space! (WW) R128(0): Attempting to read Video BIOS from legacy ISA space! (WW) R128(0): Video BIOS not found! (WW) R128(0): Can't determine panel dimensions, and none specified. Disabling programming of FP registers. <snip...> (II) R128(0): Page flipping disabled (!!) R128(0): For information on using the multimedia capabilities of this adapter, please see http://gatos.sf.net. (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xb0000000 - 0xb0003fff (0x4000) MS[B] [1] 0 0 0xb4000000 - 0xb7ffffff (0x4000000) MS[B] [2] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [3] -1 0 0x00000000 - 0x00000000 (0x1) MX[B] [4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B] [5] -1 0 0xa0001000 - 0xa0001fff (0x1000) MX[B] [6] -1 0 0xa0002000 - 0xa0002fff (0x1000) MX[B] [7] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B] [8] -1 0 0xb0020000 - 0xb003ffff (0x20000) MX[B](B) [9] -1 0 0xb0000000 - 0xb0003fff (0x4000) MX[B](B) [10] -1 0 0xb4000000 - 0xb7ffffff (0x4000000) MX[B](B) [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [14] 0 0 0x00000400 - 0x000004ff (0x100) IS[B] [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [17] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B) [18] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [19] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. Fatal server error: Caught signal 7. Server aborting
