On Thu, 2004-01-08 at 14:38, Manuel García Urreta wrote: > > I finally get working Xfree with 3D accel. in my iBook G4 1Ghz, radeon 9200, > 14''.
[...] > 2) Then I start X server, and all start perfectly, then i switch to a > virtual terminal and start > reading the /var/log/XFree86.0.log file, i noticed some errors: > > /****************/ > (II) LoadModule: "GLcore" > (II) Loading /usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a > Skipping > "/usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a:m_debug_clip.o": > No symbols found > Skipping > "/usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a:m_debug_norm.o": > No symbols found > Skipping > "/usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a:m_debug_xform.o": > No symbols found > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules-dri-trunk/fonts/libspeedo.a > Skipping > "/usr/X11R6/lib/modules-dri-trunk/fonts/libspeedo.a:spencode.o": No symbols > found Harmless. > (**) Chipset ATI Radeon 9100 QM (AGP) found (I have an radeon 9200) You probably override the ChipID in the XF86Config-4 Device section? > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 8, (OK) > drmGetBusid returned '' Harmless. > (WW) RADEON(0): [agp] AGP not available > (WW) RADEON(0): [agp] AGP failed to initialize -- falling back to PCI > mode. > (WW) RADEON(0): [agp] If this is an AGP card, you may want to make sure > the agpgart > kernel module is loaded before the radeon kernel module. > > I am sure agpgart is loaded in the kernel You need uninorth_agp with a 2.6 kernel. > The direct rendering appear to be enable (in Xfree86.0.log say that), but > when i run glxgears I get only 547 FPS, i know that this video card is > better than that. Should be better with AGP. It shouldn't have been too hard to find most if not all of this information in the list archives. -- Earthling Michel Dänzer | Debian (powerpc), X and DRI developer Software libre enthusiast | http://svcs.affero.net/rm.php?r=daenzer
