On Dec 10, 2003, at 4:09 PM, David Pye wrote:
Hi Barry,
The error you have says /dev/hda4 DOES NOT EXIST.
fsck.ext3: No such file or directory while trying to open /dev/hda4
This *might* be because under filesystem support in kernel config, you
selected devfs...
David
[...]
Through a series of tests, I was able to advance beyond the hangup
just
after the line "hub.c: new USB device 10:1a.0-1, assigned address 2"
in
the boot process. However, I am not sure that it indicates progress.
By removing OHCI for USB and leaving ADB (Macintosh device drivers)
enabled along with UHCI (the default one for Intel, etc., not JE), I
received the following:
<excerpt>
input3: ADB HID on ID 3:3.01
adb: finished probe task...
INIT: version 2.85 booting
Starting Bootlog daemon: bootlogd.
Loading /etc/console/boottime.kmap.gz
Activating swap.
Checking root file system...
fsck 1.35-WIP (21-Aug-2003)
fsck.ext3: No such file or directory while trying to open /dev/hda4
/dev/hda4:
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the
superblock
is corrupt, and you might try running e2fsck with an alternate
superblock:
e2fsck -b 8193 <device>
fsck failed. Please repair manually and reboot. Please note
that the root file system is currently mounted read-only. To
Remount it read-write:
# mount -n -o remount,rw /
CONTROL-D will exit from this shell and REBOOT the system.
</excerpt>
The root partition checks out fine when I boot into the default 2.4.22
kernel from the Debian installer. I am reluctant to muck around with
fsck in light of that. Perhaps I am missing some key kernel
configuration directive in my filesystems options? I do have ext3 and
its journalling option compiled into the kernel.
I was surprised that disabling OHCI took me further. I would have
thought that a 17" PowerBook would use OHCI. Is UHCI the correct
driver for this laptop's USB?
Thanks,
--
Barry C. Hawkins
All Things Computed
site: www.allthingscomputed.com
weblog: www.yepthatsme.com
David,
Thanks, I will check that out right now. In my wanderings I remember
something about enabling devfs to enable something related to usbfs or
something like that. Since I have to be in OS X to connect to the
internet and use mail, I have to go on memory. I will check it out;
many thanks.
Regards,
--
Barry C. Hawkins
All Things Computed
site: www.allthingscomputed.com
weblog: www.yepthatsme.com
