Hi, Récemment Sun, 26 Oct 2003 20:24:01 -0700 "Chris Tillman" <[EMAIL PROTECTED]> a écrit:
> > Does the cdrom seem to mount correctly? Excuse me, I've forgoten to give the information : the cdrom works correctly, and I can cd read, cp and so on with all files in it. >Try mounting it ahead of time > using the 'Mount an already initialized partition' item, or check in All initializedpartition are correctly mounted on /target, so the hard disk is correctly detected (as /dev/hdc) . > console 2 during the install attempt to see if _you_ can see files > under /instmnt . This works too. I've open 3 or 4 consoles, but the problem is the name of the searched files for the base system install. They're not in the cdrom ( I'm using a sarge netinstall cdrom found with debian.org website ) And for the network install, they're correctly downloaded, but something goes wrong after the download. For now, I'm trying to build a complete base system (with libc, complete yaboot, and correct keyboard with "|" (often needed ;-) ) After this, I'll put it on a cdrom with a"big" cp from the cdrom to the/ partition. ybin -v and go...but I prefer over all a clean Debian install. BTW, the kernel I've build (with all the needed modules) is compiled 1) with gcc-3.3 --> does it matter ? 2) with the above options : CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO=y # CONFIG_CPU_FREQ is not set And what else ? Did I forget something important > Of course, if my base system works, I'll do an iso file for someone interested and will annouce it ;-) Cheers -- NO ePATENTS / NON AUX BREVETS SUR LES LOGICIELS
