I finally downgraded to alsa version 0.9.1 and it works fine! Bastien
Fri, 8 Aug 2003 00:05:26 +0200 Bastien Rocheron <[EMAIL PROTECTED]> me disait ceci: > I already tried that since I read something you wrote about it but it was > unsuccesful,I have this error at boot time that tells me : > > Starting ALSA (version 0.9.4):i2c-core.o: i2c core module > i2c-core.o: adapter uni-n 0 registered as adapter 0. > i2c-core.o: adapter uni-n 1 registered as adapter 1. > Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits > i2c-core.o: adapter mac-io 0 registered as adapter 2. > Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits > i2c-core.o: driver PMac Keywest Audio registered. > ALSA ../alsa-kernel/ppc/keywest.c:84: tumbler: cannot initialize the MCS > <-------- is it an error ? > powermac. > Restoring ALSA mixer settings ... done. > > and in the dmesg I noticed that following: > > i2c-core.o: driver unregistered: PMac Keywest Audio <------ > here too? > tas driver [TAS3001c driver V 0.3]) > using i2c address: 0x34 from device-tree > i2c-core.o: driver TAS3001c driver V 0.3 registered. > i2c-core.o: client [tas Digital Equalizer] registered to adapter [mac-io > 0](pos. 0). > Audio jack unplugged, enabling speakers. > AE-Init tumbler mixer > PowerMac Tumbler DMA sound driver rev 016 installed > Core driver edition 01.06 : PowerMac Built-in Sound driver edition 00.07 > Write will use 4 fragments of 32768 bytes as default > i2c-core.o: client [tas Digital Equalizer] unregistered. > i2c-core.o: driver unregistered: TAS3001c driver V 0.3 > i2c-core.o: driver PMac Keywest Audio registered. > i2c-core.o: client [TAS3001c] registered to adapter [mac-io 0](pos. 0). > > > thank you > > Bastien > > > > > Thu, 07 Aug 2003 07:48:44 +0200 > Vincent Bernat <[EMAIL PROTECTED]> me disait ceci: > > > OoO En ce début de soirée du mercredi 06 août 2003, vers 21:58, > > Bastien <[EMAIL PROTECTED]> disait: > > > > > I compiled Alsa modules 0.9.4-1 on my ibook 2001 dual usb with powermac > > > tumbler > > > and kernel benH 2.4.21 on Debian testing. I can load the modules, but in > > > alsamixer both > > > headphones and speakers level stay at 0, I cannot increase them so I get > > > no > > > sound. I can increase master or everything else. Sound applications work > > > fine > > > like TerminatorX but no sound is coming out. > > > > Try to unload alsa, load dmasound, then unload and reload alsa. > > -- > > BOFH excuse #311: > > transient bus protocol violation > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
