Hi together,
another Problem with my new Powerbook G4 and Debian Sid.
The pcmcia Cardsystem seems to work flawless, but if i attach a card in
the slot i get the following messages:
May 19 17:55:47 pbk4 kernel: Linux PCMCIA Card Services 3.2.2
May 19 17:55:47 pbk4 kernel: kernel build: 2.4.20-ben10 unknown
May 19 17:55:47 pbk4 kernel: options: [pci] [cardbus] [apm]
May 19 17:55:47 pbk4 kernel: Intel ISA/PCI/CardBus PCIC probe:
May 19 17:55:47 pbk4 kernel: TI 1410 rev 02 PCI-to-CardBus at slot 10:1a, mem
0xa0000000
May 19 17:55:47 pbk4 kernel: host opts [0]: [pci only] [pci irq 58] [lat
16/32] [bus 17/20]
May 19 17:55:47 pbk4 kernel: PCI card interrupts, polling interval = 1000 ms
May 19 17:55:47 pbk4 cardmgr[3318]: watching 1 sockets
May 19 17:55:47 pbk4 cardmgr[3318]: starting, version is 3.2.2
May 19 17:55:52 pbk4 cardmgr[3319]: socket 0: Level One 10/100 Fast Ethernet
May 19 17:55:53 pbk4 cardmgr[3319]: executing: 'modprobe pcnet_cs'
May 19 17:55:53 pbk4 cardmgr[3319]: bind 'pcnet_cs' to socket 0 failed:
Operation not permitted
May 19 17:55:59 pbk4 cardmgr[3319]: executing: 'modprobe -r pcnet_cs'
I have change the config.opts to change the following memory entry:
#include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
include memory 0xa0000000-0xa0ffffff
with the commented line my Powerbook quits hard and i need to reboot to
reactivate the system.
With an other pcmcia car (modem) i get the same Operation not permitted.
Anyone an idea?
thanks,
weiti
--
I watch television because you don't know what it will do if you leave it
in the room alone.
Tim Weippert <[EMAIL PROTECTED]>
GnuPG Key http://www.topf-sicret.org/kontakt.html
