On Sat, 19 Apr 2003 03:00:17 +0200, David Ulrich wrote:
> Hello,
>
> It is possible to boot from a HD on a SCSI Adaptec 2940 with debian
> 2.4.18? I search the driver in the kernel source but I found nothing.
>
> Thx
>
> David
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I would wager that it is certainly possible - I've been using a
2940U2W since 2.2.12 (I believe) - granted, this is in an x86
machine. You'll want the aic7xxx driver - CONFIG_SCSI_AIC7XXX.
Here's a snip from my dmesg output:
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 2940 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
Vendor: WDIGTL Model: WD91 ULTRA2 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Vendor: PLEXTOR Model: CD-ROM PX-40TW Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Vendor: YAMAHA Model: CRW4416S Rev: 1.0h
Type: CD-ROM ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled. Depth 8
Vendor: HP Model: C6270A Rev: 3828
Type: Processor ANSI SCSI revision: 02
Vendor: iomega Model: jaz 2GB Rev: E.15
Type: Direct-Access ANSI SCSI revision: 02
HTH
-Drew
