On 28 Mar, this message from Bastien Nocera echoed through cyberspace: > On Fri, 2003-03-28 at 21:11, Mich Lanners wrote: >> On 28 Mar, this message from Edd Dumbill echoed through cyberspace: >> > usb.c: registered new driver usb-storage >> > scsi1 : SCSI emulation for USB Mass Storage devices >> > Vendor: Generic Model: Generic CF Rev: 2.5D >> > Type: Direct-Access ANSI SCSI revision: 02 >> > >> > So I am restricted to reading CF cards only on the iBook. I have >> > all the same modules loaded: sg, sd_mod. >> > >> > Anybody got any ideas what I'm doing wrong and how to remedy this? >> >> Is your kernel compiled with multiple LUN support >> (CONFIG_SCSI_MULTI_LUN)? > > It's the second time I see this today ^_^. It's not needed to > recompile: " > When using RAID storage configured with Logical Unit Numbers (LUNs) > greater than zero, it is necessary to enable LUN support by adding the > following entry to the /etc/modules.conf file: > > options scsi_mod max_scsi_luns=255
... assuming he uses SCSI compiled as a module :-) I didn't see any way to modify this when compiled-in. /proc shows nothing obvious... Cheers Michel ------------------------------------------------------------------------- Michel Lanners | " Read Philosophy. Study Art. 23, Rue Paul Henkes | Ask Questions. Make Mistakes. L-1710 Luxembourg | email [EMAIL PROTECTED] | http://www.cpu.lu/~mlan | Learn Always. "
