Now that I have moved past the saga of mol module
compiliation, I have encountered a problem actually
running mol. All seems to work well, until I get
this error message: Unimplemented load instruction.
I realize this message is probably for the mol
mailing list, but I thought I give you all a try.
Here's the output on my PowerMac 7500 (not a G3,
which it says below):
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.8500
Timebase frequency estimate: 00BEBA18
Timebase frequency: 12.50 MHz
128MB RAM mapped at 0x40000000
Running in PowerPC G3 mode
Property 'cpu/bus-frequency' is missing!
Using Linux keycodes
Using nvram-image '/var/lib/mol/nvram.ow'
xvideo: Could not connect to X server
Running on VT 8.
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.
MODE: 1024* 768, depth 32 { 0.0, 60.0, 70.0, 75.0, 75.0, 90.2, 99.7 } Hz
Starting in video mode 1024*768, depth 32, 75.0 Hz [offs:528, rb:4128]
Autoswitching to console
Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
Using /dev/dsp for sound output
HFS images/moldisk.i MOL <read-only> 0 MB
HFS /dev/sdb11 psycho <read-only> 2139 MB
53c94 SCSI-driver installed (IRQs 12/0)
Could not register MESH SCSI unit. Need a second bus ??
Swim3 floppy driver installed
Hammerhead driver installed
<ROM_FIX> 4096K ROM mapped at 0x4fc00000
<Physical ROM mapping>
ROM checksum = 0x129
Mapping GC at F3000000
dcbi treated as nop
dcbi treated as nop
[CLOCK_FIX_HACK]
Unmapping GC
Mapping GC at F3000000
Unimplemented load instruction
Unimplemented load instruction
--
wcrowshaw
