I have a TEAC CDR55S cd-writer witd ID 3 in my SCSI chain.
Giving
>cdrecord -v -dummy speed=1 dev=0,3,0 -data gigi.iso >burnlog 2>&1
I have a burnlog like this:
scsidev: '0,3,0'
scsibus: 0 target: 3 lun: 0
Linux sg driver version: 2.1.40
WRa Data 00 0A 00 00
Cdrecord 1.10 (powerpc-unknown-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.5'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : RELADR SYNC LINKED
Vendor_info : 'TEAC '
Identifikation : 'CD-R55S '
Revision : '1.0R'
Device seems to be: Teac CD-R50S.
Using driver for Teac CD-R50S, Teac CD-R55S, JVC XR-W2010, Pinnacle RCD-5020
(teac_cdr50).
Driver flags : SWABAUDIO
Buffer cap: 655360
Drive buf size : 655360 = 640 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 617 MB
Total size: 708 MB (70:14.21) = 316066 sectors
Lout start: 709 MB (70:16/16) = 316066 sectors
Current Secsize: 2048
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 43783
Starting to write CD/DVD at speed 1 in dummy mode for single session.
Last chance to quit, starting dummy write in 9 seconds.
Afete a few seconds:
SCSI disk error: host 0 channel 0 id 4 lun 0 return code = 6000000
scsidisk I/O error/ dev 08:14, sector NNNNNN
and other lines like that with different NNNNN
Then box stop. I can only make a HW reboot.
What can I do?
cdrecord -scanbus says:
Linux sg driver version: 2.1.40
Cdrecord 1.10 (powerpc-unknown-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Using libscg version 'schily-0.5'
scsibus0:
0,0,0 0) 'QUANTUM ' 'FIREBALL SE2.1S ' 'PJ0A' Disk
0,1,0 1) *
0,2,0 2) *
0,3,0 3) 'TEAC ' 'CD-R55S ' '1.0R' Removable CD-ROM
0,4,0 4) 'SAMSUNG ' 'WN34324U (gm028)' '0104' Disk
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
Thanks,
Matteo.
