Hello,
iīm trying to install an Debian Linux on an IBM 43P-150 (chrp) workstation
but i couldnīt succeed yet. I took the graphik card out and iīm using a serial
console with null-modem-cable.
A) I tried debian woody V.3.0R0 with the Image-File LINUX.BIN , 913 kb
B) Image from Suse Linux.bin 1.108 kb. Stopped with remark to insert root.bin-
disk , but machine is no more reacting on any input from the serial console nor
keyboard.
Thanks in advance for every tipp concerning the installation of Debian on the
43P 150.
Please responde to [EMAIL PROTECTED]
---------------------------
machine type:
PowerPC,604e 375 MHz
L2-Cache 1024K
Memory
Memory DIMM slot = 3 size = 256 MB
Memory DIMM slot = 4 size = 256 MB
....
Diskette Drive
addr=3f0
Display Panel
Integrated Ethernet
addr=0004ac973590
SCSI controller id= 7
CD-ROM id,lun=3,0
36703 MB Harddisk id,lun=4,0
36703 MB Harddisk id,lun=5,0
PCI Adapters
...
System Information
Serial Number
TCP99256 Firmware Version
09/13/99 Firmware Date
---------------------------
(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA)
0 > boot floppy:,\linux.bin root=/dev/fd0 load_ramdisk=1 console=ttyS0,9600
chrpboot starting: loaded at 0x400000
avail_ram = 4e5000
gunzipping (0x10000 <- 0x415cb8:0x4e3194)...done 1934704 bytes
start address = 0x10000
instantiating rtas...rtas at 00565000
done
copying OF device tree...done
booting...
device tree used 29000 bytes
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
Total memory = 512MB; using 2048kB for hash table (at c0600000)
Linux version 2.2.20-chrp ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002
(Debian prerelease)) #1 Thu Mar 21 16:32:58 EST 2002
Boot arguments: root=/dev/fd0 load_ramdisk=1 console=ttyS0,9600
Warning: no mac-io found
PCI buses 0..1 controlled by pci at 80000000
RTAS Event Scan Rate: 1 (2999 jiffies)
OpenPIC Version 1.0 (4 CPUs and 16 IRQ sources) at fcec0000
OpenPIC timer frequency is not set
time_init: decrementer frequency = 1246845840/60
Console: colour dummy device 80x25
Calibrating delay loop... NIP: FCEC0000 XER: 20000000 LR: 0000466C REGS:
c018fa80 TRAP: 0700
MSR: 00083912 [FP, DR, ME]
TASK = c018e220[0] 'swapper' mm->pgd c018c000 Last syscall: 0
last math c018e220
GPR00: 00001012 C018FB30 C018E220 0018FBB0 00565000 405656DC 0000466C 0018FA70
GPR08: 005656DC 00001002 C018FBCC 00000008 84842022 00000000 00000000 00000000
GPR16: 00000000 00000000 20000002 00000000 00001032 00190050 00000000 C0004154
GPR24: C0007068 C01B0000 00000007 C0190028 00000001 00001032 C018FBB0 00000004
Call backtrace:
C01D64F4 C0005B6C C00070DC C0004154 C0018198 C01AF380 C01AF818
C0003CF0
Kernel panic: Exception in kernel pc fcec0000 signal 4
In swapper task - not syncing
Rebooting in 180 seconds..NIP: FCEC0000 XER: 20000000 LR: 0000466C REGS:
c018f7f0 TRAP: 0700
(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA)
(BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB)
0 > boot floppy:,\Linux.bin root=/dev/fd0 load_ramdisk=1 prompt_ramdisk=1 consol
e=ttyS0,9600
chrpboot starting: loaded at 0x400000
avail_ram = 516000
gunzipping (0x10000 <- 0x416128:0x513e60)...done 2428452 bytes
start address = 0x10000
instantiating rtas...rtas at 00596000
done
copying OF device tree...done
booting...
device tree used 29020 bytes
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
No RTAS service called display-character
Total memory = 512MB; using 2048kB for hash table (at c0600000)
Linux version 2.2.16 ([EMAIL PROTECTED]) (gcc version 2.95.3 19991030 (prereleas
e/franzo/20000625)) #1 Thu Nov 23 10:54:44 GMT 2000
Boot arguments: root=/dev/fd0 load_ramdisk=1 prompt_ramdisk=1 console=ttyS0,9600
Warning: no mac-io found
PCI buses 0..1 controlled by pci at 80000000
RTAS Event Scan Rate: 1 (2999 jiffies)
OpenPIC Version 1.0 (4 CPUs and 16 IRQ sources) at fcec0000
OpenPIC timer frequency is not set
time_init: decrementer frequency = 1246845840/60
Console: colour dummy device 80x25
Calibrating delay loop... 249.04 BogoMIPS
Memory: 513692k available (1684k kernel code, 8636k data, 168k init) [c0000000,e
0000000]
Dentry hash table entries: 65536 (order 7, 512k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 131072 (order 7, 512k)
VFS: Diskquotas version dquot_6.4.0 initialized
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Warning: no ADB interface detected
pmac nvram is core99: 0
Don't know how to access NVRAM with 4 addresses
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 524288 bhash 65536)
NET4: Linux IPX 0.38 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
NET4: AppleTalk 0.18 for Linux NET4.0
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
Macintosh non-volatile memory driver v1.0
RAM disk driver initialized: 16 RAM disks of 64000K size
loop: registered device at major 7
W82C105: IDE controller on PCI bus 00 dev 59
W82C105: device enabled (Linux)
W82C105: will probe irqs later
ide0: BM-DMA at 0xbff000-0xbff007, BIOS settings: hda:pio, hdb:pio
SL82C105 command word: 145
IDE timing: 00000909, resetting to PIO0 timing
IDE control/status register: 50ff0091
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
LVM version 0.8e by Heinz Mauelshagen (4/1/2000)
lvm -- Driver successfully initialized
sym53c8xx: at PCI bus 0, device 16, function 0
sym53c8xx: setting PCI_COMMAND_IO PCI_COMMAND_MEMORY...
sym53c8xx: setting PCI_COMMAND_MASTER...(fix-up)
sym53c8xx: 53c875 detected
sym53c875-0: rev 0x4 on pci bus 0 device 16 function 0 irq 23
sym53c875-0: ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.0-20000709
scsi : 1 host.
Vendor: IBM Model: CDRM00203 !K Rev: 1_01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Vendor: IBM Model: IC35L036UWD210-0 Rev: S5BS
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 4, lun 0
Vendor: IBM Model: IC35L036UWD210-0 Rev: S5BS
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdb at scsi0, channel 0, id 5, lun 0
scsi : detected 1 SCSI cdrom 2 SCSI disks total.
sym53c875-0-<3,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
Uniform CD-ROM driver Revision: 3.11
SCSI device sda: hdwr sector= 512 bytes. Sectors= 71687340 [35003 MB] [35.0 GB]
sdb: Spinning up disk...<6>sym53c875-0-<5,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns
, offset 16)
..<6>sym53c875-0-<5,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
.<6>sym53c875-0-<5,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
.<6>sym53c875-0-<5,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
.<6>sym53c875-0-<5,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
.<6>sym53c875-0-<5,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
.<6>sym53c875-0-<5,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
.<6>sym53c875-0-<5,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
.<6>sym53c875-0-<5,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
.<6>sym53c875-0-<5,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
ready
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 71687340 [35003 MB] [35.0 GB]
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
pcnet32.c: PCI bios is present, checking for devices...
PCI Master Bit has not been set. Setting...
Found PCnet/PCI at 0xbff800, irq 22.
eth0: PCnet/FAST 79C971 at 0xbff800, 00 04 ac 97 35 90
tx_start_pt(0x0400): 64 bytes, BCR18(6821):BurstWrEn NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 22.
pcnet32.c:v1.25kf 26.9.1999 [EMAIL PROTECTED]
Partition check:
sda: unknown partition table
sdb: unknown partition table
VFS: Insert root floppy disk to be loaded into RAM disk and press ENTER
(BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB)
end.
Please responde to [EMAIL PROTECTED]
