Quoting Michel Lanners <[EMAIL PROTECTED]>:
> On 11 Sep, this message from [EMAIL PROTECTED] echoed through
> cyberspace:
> > Quoting Michel Lanners <[EMAIL PROTECTED]>:
> >
> >> On 8 Sep, this message from [EMAIL PROTECTED] echoed through
> >> cyberspace:
> >> >> Can you show us your /var/log/XFree86.0.log?
> >> >
> >> > Yes i can:
> >> [snip]
> >> > (II) FBDev(0): using default device
> >> > (II) Running in FRAMEBUFFER Mode
> >> > (**) FBDev(0): Depth 8, (--) framebuffer bpp 8
> >> > (==) FBDev(0): Default visual is PseudoColor
> >> > (==) FBDev(0): Using gamma correction (1.0, 1.0, 1.0)
> >> > (II) FBDev(0): Hardware: platinum (vidmem: 1024k)
> >> > (II) FBDev(0): Checking Modes against framebuffer device...
> >> > (II) FBDev(0): mode "800x600" ok
> >>
> >> OK, good... so it sees 800x600 somewhere.
> >>
> >> > (II) FBDev(0): Checking Modes against monitor...
> >> > (--) FBDev(0): Virtual size is 640x480 (pitch 640)
> >>
> >> ... but why is it going back to 640x480 now?
> >
> > I succeeded to use X at 800x600, but i need to start another
> framebuffer application and interrupt it before i start X.
> >
> >
> > ex: localhost>su -c "fbzen" ; nice -n 10 startx ; exit
> > <ctrl-c> while fbzen is running
> >
> > In this condition X use 800x600 résolution. I understand that
> the 800 x600 mode need to be initialised before, or else it goes
> 640x480. How can i pré-initialize the monitor mode so i can start X
> directly. When i use: fbset 800x600-60 the framebuffer comply but X
> doesn`t care unless i use the "trick".
>
> Hmm, have you tried 'fbset -a <mode>' like I suggested? Do you have a
> Mac<->VGA adapter? Old Macs don't do DDC (like modern i386 grafic
> cards), but rather have three pins on the DB15 Mac monitor connector,
> and the monitor indicates its type (and hence its capabilities) by
> some
>
Sorry for the line breaks, i use opera and IMP under win2000 at work.
I`ve got no control on this one.
What the -a switch mean in fbset -a <mode>. It doesn`t appear in the manual.
What is DDC?
Why do the monitor isn`t probed when i used the trick with fbzen and <ctrl-c>?
I use bootX and i need a driver, for mac os 9.1, to use the mach64 or else it
doesn`t boot, when the card is in the slot no.:1. Now it is in the slot.:2 and
i can use the computer. I`ll be downloading a new kernel soon to use the atyfb.
I tought that an old world ppc could not use a new world kernel!
Charles-Éloi :^]
