On 1 Aug, this message from Michael Hackett echoed through cyberspace:
> On Thu, 1 Aug 2002 16:50:41 -0400 (EDT)
> "Albert D. Cahalan" <[EMAIL PROTECTED]> wrote:
>
>> Michael Hackett writes:
>> > No, because you can't change the PCI clock.
>>
>> Do you know this specifically for his hardware? Remember that
>> it is 100% allowed to run PCI at less than 33 MHz, and that
>> this is common.
>
> Ah, well, I've never heard of that on the Mac side, but that may be the
> case. From everything I've read, the PCI clock was independent of the
> system bus clock, but nothing's to say that information wasn't wrong.
No, you're right. The PCI clock is fixed at 33 MHz.
> Can you point me to a source for more info?
Look for this here on Apple's developer site:
Designing_PCI_Cards_Drivers.pdf
Also, Apple technote 1008 is of interest.
> Regardless, the fact remains that any PPC Mac has plenty of PCI
> bandwidth for megabit Ethernet.
Well, I'm having problems with a 100Mb/s Ethernet on my 7600. Remember
that 80 MB/s is the absolute maximum according to Apple
_under_optimal_conditions... meaning using 'Read Multiple' and 'Memory
Write & Invalidate' PCI commands for the card's DMA operations. No idea
what the RTL8139 on my card really uses....
Cheers
Michel
-------------------------------------------------------------------------
Michel Lanners | " Read Philosophy. Study Art.
23, Rue Paul Henkes | Ask Questions. Make Mistakes.
L-1710 Luxembourg |
email [EMAIL PROTECTED] |
http://www.cpu.lu/~mlan | Learn Always. "
