the "p" command referenced below was really the "c" ciommand, sorry...
On Tuesday 11 June 2002 08:47, Corey Kovacs wrote: > Ok, last night I realized that the problem might be that I patitioned the > drive for yellowdog using BootX to boot so I repartitioned the drive. > I tried yaboot again so I cleared out the drive with the "i" command, then > created the 800K bootstrap partition using "b", then a root partition using > "p", then 3P called it Root, then swap with "p", 4P and called it "swap", > the installer initialized and mounted everything, then I tried yaboot, no > good, again told me it was an Oldworld machine (I thought it might be a > mistake if I'd done too many things wrong, this just verified yaboot was > right) so then I went back to the partitioning, used "r" to move the > bootstrap partition to 4P, used the "make system bootable" option, then ran > nvsetenv boot-device `ofpath /dev/hda2` as hda2 was not the root instead of > hda3 from a shell. > > Long story short, it still won't boot. I am going to try to do the whol > thing over without the bootstrap partition and see how that goes. Before I > venture off, does anyoine see anything that I might have done wrong? > > Corey > > On Tuesday 11 June 2002 00:16, Chris Tillman wrote: > > On Mon, Jun 10, 2002 at 04:11:07PM -0500, Corey Kovacs wrote: > > > That's not worked either. devalias tells me that > > > ide0 is set to /pci/mac-io/[EMAIL PROTECTED] so I do... > > > > > > setenv boot-device ide0/[EMAIL PROTECTED]:9 > > > > > > then try booting by typing "boot" but it give a similar error... > > > > > > typing in the whole path does me no good either.... > > > > > > Question, if I can eventually use quik, do I need the Mac OS installed? > > > > Yes, you can do away with MacOS if quik works. > > > > Did you run the Make hard Disk Bootable step in the installer? That's > > what actually installs quik to the boot block. The nvsetenv part is > > just to set the OpenFirmware variable, which seems not to be the > > problem. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
