Answer: I solved my own problem: I upgrated kernel, from 2.4.15-pre4 to 2.4.19-ben0 (downloaded from www.ppckernel.org), and now it works.
At 2:16 +0100 29-03-2002, raphaello wrote: >Question: >The Ethernet card of my PowerBookG3 doesn't get recognized by my updated Woody. > >During boot, I get: >SCIOCSIFADDR: no such device >eth0: error while getting interface flags: no such device > >and in fact, lspci gives me only this: >00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP >00:10.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP >2x (rev 02) >01:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI >01:17.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03) >01:18.0 USB Controller: Apple Computer Inc. KeyLargo USB >01:19.0 USB Controller: Apple Computer Inc. KeyLargo USB >01:1a.0 CardBus bridge: Texas Instruments PCI1211 >06:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI >06:0f.0 Class ffff: Apple Computer Inc. UniNorth GMAC (rev ff) >(I don't know what all this corresponds to, but there is no Ethernet inside.) > >But my kernel has NE2K_PCI modulised, and module ieee1394 is inserted in >/etc/modules and it gets accepted with "modprobe ieee" (or "ieee1394" as I >remember). -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
