Dear all, I figured out that, in fact , I have three windows instead of two like I said before. Also, I found that the TWM is running but I cannot do many useful things on it other than to type and execute the shell commands.
Please send me your suggestions. Thank you very much, Ruy. Ruy de Oliveira wrote: > Dear all, > > I've had a lot of difficulty in atempting to get my "Laptop Dell C500" > working along with Xserver. As far as I know that computer uses "ATI > Mobility M1" card. I'm using kernel 2.2.19. > > Firstly I started testing xf86_3.3.6, but since I had no success I > decided to install xf86_4.1.0. Then, when I attempted to install the > under developement version from > http://people.debian.org/~branden/woody/, the Dselect always complained > that it was missing a package called "libfreetype6". Then I decided to > install the the xf86_4.1.0 directly from www.xfree86.org site. > > I've already managed to install and run something. But, in fact, I > cannot find the exact driver for my card. When I use the "ATI Rage 128" > option I manage to run the X server, but I only get two simultaneous > windows. One titled "login" > and the other "xterm". Both windows came up with the shell prompt, like > the well-known Xterm terminal. > > So I'm not sure whether I still have a lack of driver or it's a matter > of windows management configuration. Anyway, I wonder if someone know > how I could find a proper driver for my card or else any other > suggestion would be wellcome. > > Thank you in advance. > > PS.: I attached the XF86Config and the results of X run files. > > ------------------------------------------------------------------------ > > XFree86 Version 4.1.0 / X Window System > (protocol Version 11, revision 0, vendor release 6510) > Release Date: 2 June 2001 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/FAQ) > Build Operating System: Linux 2.0.36 i686 [ELF] > Module Loader present > (==) Log file: "/var/log/XFree86.0.log", Time: Fri Aug 10 10:59:38 2001 > (==) Using config file: "/etc/X11/XF86Config" > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) ServerLayout "Simple Layout" > (**) |-->Screen "Screen 1" (0) > (**) | |-->Monitor "My Monitor" > (**) | |-->Device "ATI Rage 128" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard1" > (**) XKB: rules: "xfree86" > (**) XKB: model: "pc101" > (**) XKB: layout: "us" > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (--) PCI:*(1:0:0) ATI Rage 128 Mobility LF rev 2, Mem @ 0xf8000000/26, > 0xfdffc000/14, I/O @ 0xec00/8 > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.1.9 > (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o > (II) Module ati: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 6.3.6 > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga > (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), > ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), > ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI), > ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI), > ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP), > ATI Rage 128 Mobility ML (AGP) > (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), > ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), > ATI Radeon VE (AGP) > (--) Assigning device section with no busID to primary device > (--) Chipset ATI Rage 128 Mobility LF (AGP) found > (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o > (II) Module r128: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 4.0.1 > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > (II) R128(0): PCI bus 1 card 0 func 0 > (**) R128(0): Depth 16, (--) framebuffer bpp 16 > (II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps) > (==) R128(0): Default visual is TrueColor > (==) R128(0): RGB weight 565 > (II) R128(0): Using 6 bits per RGB (8 bit DAC) > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) R128(0): initializing int10 > (II) R128(0): Primary V_BIOS segment is: 0xc000 > (--) R128(0): Chipset: "ATI Rage 128 Mobility LF (AGP)" (ChipID = 0x4c46) > (--) R128(0): Linear framebuffer at 0xf8000000 > (--) R128(0): MMIO registers at 0xfdffc000 > (--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1) > (**) R128(0): Using flat panel for display > (II) R128(0): Panel size: 1024x768 > (II) R128(0): Panel ID: IBM ITXG76E2 > (II) R128(0): Panel Type: Color, Single, TFT > (II) R128(0): Panel Interface: LVDS > (II) R128(0): PLL parameters: rf=2700 rd=60 min=12500 max=25000; xclk=10500 > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) R128(0): VESA BIOS detected > (II) R128(0): VESA VBE DDC supported > (==) R128(0): Using gamma correction (1.0, 1.0, 1.0) > (II) R128(0): My Monitor: Using hsync range of 31.50-57.00 kHz > (II) R128(0): My Monitor: Using vrefresh range of 40.00-150.00 Hz > (II) R128(0): Clock range: 12.50 to 250.00 MHz > (II) R128(0): Not using default mode "720x400" (no mode of this name) > (II) R128(0): Not using default mode "640x480" (hsync out of range) > (II) R128(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) R128(0): Not using default mode "1024x768" (hsync out of range) > (II) R128(0): Not using default mode "1024x768" (hsync out of range) > (II) R128(0): Not using default mode "1152x864" (no mode of this name) > (II) R128(0): Not using default mode "1280x960" (no mode of this name) > (II) R128(0): Not using default mode "1280x960" (no mode of this name) > (II) R128(0): Not using default mode "1280x1024" (no mode of this name) > (II) R128(0): Not using default mode "1280x1024" (no mode of this name) > (II) R128(0): Not using default mode "1280x1024" (no mode of this name) > (II) R128(0): Not using default mode "1600x1200" (no mode of this name) > (II) R128(0): Not using default mode "1600x1200" (no mode of this name) > (II) R128(0): Not using default mode "1600x1200" (no mode of this name) > (II) R128(0): Not using default mode "1600x1200" (no mode of this name) > (II) R128(0): Not using default mode "1600x1200" (no mode of this name) > (II) R128(0): Not using default mode "1792x1344" (no mode of this name) > (II) R128(0): Not using default mode "1792x1344" (bad mode > clock/interlace/doublescan) > (II) R128(0): Not using default mode "1856x1392" (no mode of this name) > (II) R128(0): Not using default mode "1856x1392" (bad mode > clock/interlace/doublescan) > (II) R128(0): Not using default mode "1920x1440" (no mode of this name) > (II) R128(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) R128(0): Not using default mode "1400x1050" (no mode of this name) > (II) R128(0): Not using default mode "1400x1050" (no mode of this name) > (II) R128(0): Not using mode "1280x1024" (no mode of this name) > (--) R128(0): Virtual size is 1024x768 (pitch 1024) > (**) R128(0): Default mode "640x480": 65.0 MHz, 37.5 kHz, 72.4 Hz > (**) R128(0): Default mode "800x600": 65.0 MHz, 50.3 kHz, 78.8 Hz > (**) R128(0): Default mode "1024x768": 65.0 MHz, 55.8 kHz, 69.2 Hz > (==) R128(0): DPI set to (75, 75) > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Symbol drmScatterGatherAlloc from module > /usr/X11R6/lib/modules/drivers/r128_drv.o is unresolved! > Symbol drmScatterGatherFree from module > /usr/X11R6/lib/modules/drivers/r128_drv.o is unresolved! > (II) R128(0): Memory manager initialized to (0,0) (1024,4096) > (II) R128(0): Reserved area from (0,768) to (1024,770) > (II) R128(0): Largest offscreen area available: 1024 x 3326 > (==) R128(0): Backing store disabled > (==) R128(0): Silken mouse enabled > (II) R128(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Indirect CPU to Screen color expansion > Solid Lines > Dashed Lines > Scanline Image Writes > Offscreen Pixmaps > Setting up tile and stipple cache: > 32 128x128 slots > 18 256x256 slots > 6 512x512 slots > (II) R128(0): Acceleration enabled > (II) R128(0): Using hardware cursor (scanline 1540) > (II) R128(0): Largest offscreen area available: 1024 x 3324 > (II) R128(0): Direct rendering disabled > (**) Mouse1: Protocol: "Microsoft" > (**) Mouse1: Core Pointer > (==) Mouse1: Buttons: 3 > (**) Mouse1: BaudRate: 1200 > (II) Keyboard "Keyboard1" handled by legacy driver > (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) > X connection to :0.0 broken (explicit kill or server shutdown). > xinit: connection to X server lost. > > waiting for X server to shut down > > ------------------------------------------------------------------------ > # File generated by xf86config. > > # > # Copyright (c) 1999 by The XFree86 Project, Inc. > # > # Permission is hereby granted, free of charge, to any person obtaining a > # copy of this software and associated documentation files (the "Software"), > # to deal in the Software without restriction, including without limitation > # the rights to use, copy, modify, merge, publish, distribute, sublicense, > # and/or sell copies of the Software, and to permit persons to whom the > # Software is furnished to do so, subject to the following conditions: > # > # The above copyright notice and this permission notice shall be included in > # all copies or substantial portions of the Software. > # > # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL > # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF > # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE > # SOFTWARE. > # > # Except as contained in this notice, the name of the XFree86 Project shall > # not be used in advertising or otherwise to promote the sale, use or other > # dealings in this Software without prior written authorization from the > # XFree86 Project. > # > > # ********************************************************************** > # Refer to the XF86Config(4/5) man page for details about the format of > # this file. > # ********************************************************************** > > # ********************************************************************** > # Module section -- this section is used to specify > # which dynamically loadable modules to load. > # ********************************************************************** > # > Section "Module" > > # This loads the DBE extension module. > > Load "dbe" # Double buffer extension > > # This loads the miscellaneous extensions module, and disables > # initialisation of the XFree86-DGA extension within that module. > SubSection "extmod" > Option "omit xfree86-dga" # don't initialise the DGA extension > EndSubSection > > # This loads the Type1 and FreeType font modules > Load "type1" > Load "freetype" > > # This loads the GLX module > # Load "glx" > > EndSection > > # ********************************************************************** > # Files section. This allows default font and rgb paths to be set > # ********************************************************************** > > Section "Files" > > # The location of the RGB database. Note, this is the name of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > > RgbPath "/usr/X11R6/lib/X11/rgb" > > # Multiple FontPath entries are allowed (which are concatenated together), > # as well as specifying multiple comma-separated entries in one FontPath > # command (or a combination of both methods) > # > # If you don't have a floating point coprocessor and emacs, Mosaic or other > # programs take long to start up, try moving the Type1 and Speedo directory > # to the end of this list (or comment them out). > # > > # FontPath "/usr/X11R6/lib/X11/fonts/local/" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" > # FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > > # The module search path. The default path is shown here. > > # ModulePath "/usr/X11R6/lib/modules" > > EndSection > > # ********************************************************************** > # Server flags section. > # ********************************************************************** > > Section "ServerFlags" > > # Uncomment this to cause a core dump at the spot where a signal is > # received. This may leave the console in an unusable state, but may > # provide a better stack trace in the core dump to aid in debugging > > # Option "NoTrapSignals" > > # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence > # This allows clients to receive this key event. > > # Option "DontZap" > > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching > # sequences. This allows clients to receive these key events. > > # Option "Dont Zoom" > > # Uncomment this to disable tuning with the xvidtune client. With > # it the client can still run and fetch card and monitor attributes, > # but it will not be allowed to change them. If it tries it will > # receive a protocol error. > > # Option "DisableVidModeExtension" > > # Uncomment this to enable the use of a non-local xvidtune client. > > # Option "AllowNonLocalXvidtune" > > # Uncomment this to disable dynamically modifying the input device > # (mouse and keyboard) settings. > > # Option "DisableModInDev" > > # Uncomment this to enable the use of a non-local client to > # change the keyboard or mouse settings (currently only xset). > > # Option "AllowNonLocalModInDev" > > EndSection > > # ********************************************************************** > # Input devices > # ********************************************************************** > > # ********************************************************************** > # Core keyboard's InputDevice section > # ********************************************************************** > > Section "InputDevice" > > Identifier "Keyboard1" > Driver "Keyboard" > # For most OSs the protocol can be omitted (it defaults to "Standard"). > # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), > # uncomment the following line. > > # Option "Protocol" "Xqueue" > > Option "AutoRepeat" "500 30" > > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > # Option "Xleds" "1 2 3" > > # Option "LeftAlt" "Meta" > # Option "RightAlt" "ModeShift" > > # To customise the XKB settings to suit your keyboard, modify the > # lines below (which are the defaults). For example, for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" > > # These are the default XKB settings for XFree86 > # Option "XkbRules" "xfree86" > # Option "XkbModel" "pc101" > # Option "XkbLayout" "us" > # Option "XkbVariant" "" > # Option "XkbOptions" "" > > # Option "XkbDisable" > > Option "XkbRules" "xfree86" > Option "XkbModel" "pc101" > Option "XkbLayout" "us" > > EndSection > > # ********************************************************************** > # Core Pointer's InputDevice section > # ********************************************************************** > > Section "InputDevice" > > # Identifier and driver > > Identifier "Mouse1" > Driver "mouse" > Option "Protocol" "Microsoft" > Option "Device" "/dev/mouse" > > # When using XQUEUE, comment out the above two lines, and uncomment > # the following line. > > # Option "Protocol" "Xqueue" > > # Baudrate and SampleRate are only for some Logitech mice. In > # almost every case these lines should be omitted. > > # Option "BaudRate" "9600" > # Option "SampleRate" "150" > > # Emulate3Buttons is an option for 2-button Microsoft mice > # Emulate3Timeout is the timeout in milliseconds (default is 50ms) > > # Option "Emulate3Buttons" > # Option "Emulate3Timeout" "50" > > # ChordMiddle is an option for some 3-button Logitech mice > > # Option "ChordMiddle" > > EndSection > > # ********************************************************************** > # Other input device sections > # this is optional and is required only if you > # are using extended input devices. This is for example only. Refer > # to the XF86Config man page for a description of the options. > # ********************************************************************** > # > # Section "InputDevice" > # Identifier "Mouse2" > # Driver "mouse" > # Option "Protocol" "MouseMan" > # Option "Device" "/dev/mouse2" > # EndSection > # > # Section "InputDevice" > # Identifier "spaceball" > # Driver "magellan" > # Option "Device" "/dev/cua0" > # EndSection > # > # Section "InputDevice" > # Identifier "spaceball2" > # Driver "spaceorb" > # Option "Device" "/dev/cua0" > # EndSection > # > # Section "InputDevice" > # Identifier "touchscreen0" > # Driver "microtouch" > # Option "Device" "/dev/ttyS0" > # Option "MinX" "1412" > # Option "MaxX" "15184" > # Option "MinY" "15372" > # Option "MaxY" "1230" > # Option "ScreenNumber" "0" > # Option "ReportingMode" "Scaled" > # Option "ButtonNumber" "1" > # Option "SendCoreEvents" > # EndSection > # > # Section "InputDevice" > # Identifier "touchscreen1" > # Driver "elo2300" > # Option "Device" "/dev/ttyS0" > # Option "MinX" "231" > # Option "MaxX" "3868" > # Option "MinY" "3858" > # Option "MaxY" "272" > # Option "ScreenNumber" "0" > # Option "ReportingMode" "Scaled" > # Option "ButtonThreshold" "17" > # Option "ButtonNumber" "1" > # Option "SendCoreEvents" > # EndSection > > # ********************************************************************** > # Monitor section > # ********************************************************************** > > # Any number of monitor sections may be present > > Section "Monitor" > > Identifier "My Monitor" > > # HorizSync is in kHz unless units are specified. > # HorizSync may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. > > HorizSync 30-100 > > # HorizSync 30-64 # multisync > # HorizSync 31.5, 35.2 # multiple fixed sync frequencies > # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies > > # VertRefresh is in Hz unless units are specified. > # VertRefresh may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. > > VertRefresh 50-100 > > EndSection > > # ********************************************************************** > # Graphics device section > # ********************************************************************** > > # Any number of graphics device sections may be present > > # Standard VGA Device: > > Section "Device" > Identifier "Standard VGA" > VendorName "Unknown" > BoardName "Unknown" > > # The chipset line is optional in most cases. It can be used to override > # the driver's chipset detection, and should not normally be specified. > > # Chipset "generic" > > # The Driver line must be present. When using run-time loadable driver > # modules, this line instructs the server to load the specified driver > # module. Even when not using loadable driver modules, this line > # indicates which driver should interpret the information in this section. > > Driver "vga" > # The BusID line is used to specify which of possibly multiple devices > # this section is intended for. When this line isn't present, a device > # section can only match up with the primary video device. For PCI > # devices a line like the following could be used. This line should not > # normally be included unless there is more than one video device > # intalled. > > # BusID "PCI:0:10:0" > > # VideoRam 256 > > # Clocks 25.2 28.3 > > EndSection > > # Device configured by xf86config: > > Section "Device" > Identifier "rage 128" > Driver "r128" > VideoRam 8192 > # Insert Clocks lines here if appropriate > EndSection > > # ********************************************************************** > # Screen sections > # ********************************************************************** > > # Any number of screen sections may be present. Each describes > # the configuration of a single screen. A single specific screen section > # may be specified from the X server command line with the "-screen" > # option. > Section "Screen" > Identifier "Screen 1" > Device "Rage 128" > Monitor "My Monitor" > DefaultDepth 8 > > Subsection "Display" > Depth 8 > Modes "640x480" "800x600" "1024x768" "1280x1024" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 16 > Modes "640x480" "800x600" "1024x768" "1280x1024" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 24 > Modes "640x480" "800x600" "1024x768" "1280x1024" > ViewPort 0 0 > EndSubsection > EndSection > > # ********************************************************************** > # ServerLayout sections. > # ********************************************************************** > > # Any number of ServerLayout sections may be present. Each describes > # the way multiple screens are organised. A specific ServerLayout > # section may be specified from the X server command line with the > # "-layout" option. In the absence of this, the first section is used. > # When now ServerLayout section is present, the first Screen section > # is used alone. > > Section "ServerLayout" > > # The Identifier line must be present > Identifier "Simple Layout" > > # Each Screen line specifies a Screen section name, and optionally > # the relative position of other screens. The four names after > # primary screen name are the screens to the top, bottom, left and right > # of the primary screen. In this example, screen 2 is located to the > # right of screen 1. > > Screen "Screen 1" > > # Each InputDevice line specifies an InputDevice section name and > # optionally some options to specify the way the device is to be > # used. Those options include "CorePointer", "CoreKeyboard" and > # "SendCoreEvents". > > InputDevice "Mouse1" "CorePointer" > InputDevice "Keyboard1" "CoreKeyboard" > > EndSection
