> Hi, > > Stefan Heimann wrote: > > > Hi! > > > > I use a Powerbook G3 with woody. After upgrading to Kernel 2.4.6, the modem > > doesn't work! I tried /dev/ttyS0, /dev/ttyS2, /dev/ttyS3, /dev/ttyS4: no > > way. > > Then I detected a startup message: > > Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IQ > > SERIAL_PCI enabled > > IN from bad port 3f9 at cd925084 > > ... > > > > With kernel 2.2.x, the modem worked fine. Could anyone help?? > > 'insmod macserial' should give you a better result. > > exert from my dmesg: > PowerMac Z8530 serial driver version 2.0 > tty00 at 0xd58ae020 (irq = 22) is a Z8530 ESCC (cobalt modem) > tty01 at 0xd58b5000 (irq = 50) is a Z8530 ESCC >
ok, I tried it and got: PowerMac Z8530 serial driver version 2.0 tty00 at 0xd58ae020 (irq = 22) is a Z8530 ESCC (cobalt modem) tty01 at 0xd58b5000 (irq = 50) is a Z8530 ESCC but some lines later: Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IQ SERIAL_PCI enabled IN from bad port 3f9 at cd925084 ... When I try to use wvdial (with my old config-file), I get the message: modem not responding. When I try to create a new config file with wvdialconf, the answer is: irda_setup timed out on 1st byte ... Sorry, no modem found. Here is the output for lsmod (before running wvdialconf): macserial pcmcia_core and after running wvdialconf: serial macserial pcmcia_core Can anyone help?? Bye Stefan ______________________________________________________________________________ Sie surfen im Internet statt im Meer? Selbst schuld! Auf zum Strand: http://lastminute.de/?PP=1-0-100-105-1
