iMac running 2.2r2. startx log and XF86Config below. Any ideas?
Thanks,
Joe
----begin startx log----
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.15pre20 ppc [ELF]
Configured drivers:
FBDev: Server for frame buffer device
(Patchlevel 11): mfb, afb, cfb8, cfb16, cfb32, NCR 77C32BLT (accel), ATI
Mach64 (accel), IMS TwinTurbo (accel), 3Dlabs Permedia 2 (accel)
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(en_US)" (overrides other XKB settings)
(**) Mouse: type: IMPS/2, device: /dev/mouse, buttons: 3
(**) FBDev: Graphics device ID: "My Video Card"
(**) FBDev: Monitor ID: "My Monitor"
(**) FontPath set to
"/usr/lib/X11/fonts/misc/:unscaled,/usr/lib/X11/fonts/cyrillic/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/Type1/,/usr/lib/X11/fonts/Speedo/,/usr/lib/X11/fonts/misc/,/usr/lib/X11/fonts/cyrillic/,/usr/lib/X11/fonts/75dpi/,/usr/lib/X11/fonts/100dpi/"
(**) FBDev: Using XF86Config video mode database
Fatal server error:
No valid modes found.
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
X connection to :0.0 broken (explicit kill or server shutdown).
----end startx log
----begin XF86Config----
# File generated by anXious - the Debian X Configuration Tool
# anXious and xviddetect are (c) 2000 Randolph Chung <[EMAIL PROTECTED]>
# Suggestions and bug reports about this tool should be sent to
# [EMAIL PROTECTED]
# ***************************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file. A more thoroughly commented version of this configuration
# file can be found in /usr/share/doc/xserver-common/examples/XF86Config.eg
# ***************************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/lib/X11/fonts/misc/:unscaled"
FontPath "/usr/lib/X11/fonts/cyrillic/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1/"
FontPath "/usr/lib/X11/fonts/Speedo/"
FontPath "/usr/lib/X11/fonts/misc/"
FontPath "/usr/lib/X11/fonts/cyrillic/"
FontPath "/usr/lib/X11/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/100dpi/"
ModulePath "/usr/X11R6/lib/modules"
EndSection
# Section "Module"
# Load "xf86Jstk.so"
# EndSection
Section "ServerFlags"
# NoTrapSignals
# DontZap
# DontZoom
# DisableVidModeExtension
# AllowNonLocalXvidtune
# DiableModInDev
# AllowNonLocalModInDev
EndSection
Section "Keyboard"
Protocol "Standard"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# XkbLayout "de"
# or:
# XkbLayout "de"
# XkbVariant "nodeadkeys"
# if you'd like to switch the positions of your capslock and
# control keys, use:
# XkbOptions "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# XkbRules "xfree86"
# XkbModel "pc101"
# XkbLayout "us"
# XkbVariant ""
# XkbOptions ""
XkbKeymap "xfree86(en_US)"
EndSection
Section "Pointer"
# Protocol "PS/2"
# Device "/dev/mouse"
Protocol "IMPS/2"
Device "/dev/mouse"
#Emulate3Buttons
EndSection
