Thanks for letting me ask you several questions. And I will cc them to debian-powerpc. So here they are: 1) Do you have X up and running? 2) Do you use /dev/ttyS0 for your modem ppp connection or do you use /dev/cua0? 3) Have you had any success running diald?
I'm sure I have other questions, but this is just a start. Obviously, for my question, you can deduce that I have problems with my 7500 with regard to X, pppd, and diald. I'm running potato, kernel 2.2.17 and attempting to use X 3.3.6-10. Thanks once again. -- wcrowshaw On Wed, Jan 31, 2001 at 01:59:56PM -0500, Daniel Eisenbud wrote: > Sure, go ahead. I'd suggest that you CC the list in the process so that > other people on the liist (and reading the archives later) get the > benefit too, but either way. > > -Daniel > > On Tue, Jan 30, 2001 at 06:17:22PM -0500, [EMAIL PROTECTED] <[EMAIL > PROTECTED]> wrote: > > I see from this post that you are running Debian on a 7500 like me. If you > > don't mind, could I ask you a couple of questions about your setup and > > see if you have experienced some of the same problems I have experience? > > > > -- > Daniel E. Eisenbud > [EMAIL PROTECTED]