Yay! I trimmed back the monitor capabilities to something silly. This
got rid of all the XF86 built in modes, making it use the frame buffer
settings. I finally have accelerated support under X :)
My Monitor section now looks like this:
Section "Monitor"
Identifier "Generic"
HorizSync 28-38
VertSync 43-50
EndSection
Section "Device"
Identifier "Generic"
Driver "r128"
BusID "PCI:0:16:0"
Option "UseFBDev"
EndSection
-- Michael
On Sat, 20 Jan 2001, Michael Hope wrote:
> Evening all. I'm experiencing the same thing on my blue iBook/Firewire.
> I'm running 2.4.1-test7 and 4.0.2-1puetzk. I get exactly the same results
> with 2.4.0-test10 and the straight Debian 4.0.2-1 or any combination of.
> The screen looks like theres a couple of extra bytes per row inserted,
> such that the second row starts 1cm from the left, the third row 2cm in,
> etc. The cursor comes up fine and moves fine, and if you pop up windows
> and pretend you can make them out and move them around.
>
> I am very suspicious of the
>
> (--) R128(0): Virtual size is 800x600 (pitch 832)
>
> line below. There is a 25 step staircase of black lines that seem to be
> due to the offsetting of each line, and 800/25 = 32. I'm going to have a
> look at the xf source next to see what 'pitch' means.
>
> -- Michael
>
> The output of startx follows (sorry).
>
> XFree86 Version 4.0.2 / X Window System
> (protocol Version 11, revision 0, vendor release 6400)
> Release Date: 18 December 2000
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.2.18 ppc [ELF]
> Module Loader present
> (==) Log file: "/var/log/XFree86.0.log", Time: Sat Jan 20 17:11:39 2001
> (==) Using config file: "/etc/X11/XF86Config-4"
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (??) unknown.
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "Generic Monitor"
> (**) | |-->Device "Generic Graphics Device"
> (**) |-->Input Device "Generic Keyboard"
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "macintosh"
> (**) XKB: layout: "us"
> (**) |-->Input Device "Generic Mouse"
> (**) FontPath set to
> "/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/l
> ib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fo
> nts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts
> /75dpi"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (--) using VT number 7
>
> ioBase_phys = 0xf0000000
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 0.1.0
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 0.1.0
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (--) PCI:*(0:16:0) ATI Rage 128 Mobility LF rev 2, Mem @ 0x94000000/26,
> 0x900000
> 00/14, I/O @ 0x0400/8
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) Module GLcore: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (WW) Warning, couldn't open module dri
> (EE) Failed to load module "dri" (module does not exist, 0)
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> (II) Module glx: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
> (II) Module pex5: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
> (II) Module record: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.13.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
> (II) Module xie: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.1.8
> (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> (II) Module speedo: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libvbe.a
> (II) Module vbe: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
> (II) Module ati: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 6.2.3
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (II) ATI: ATI driver (version 6.2.3) for chipsets: ati
> (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
> ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK
> (PCI),
> ATI Rage 128 RL (AGP), ATI Rage 128 Pro PF (AGP), ATI Rage 128 PR,
> ATI Rage 128 Mobility LE (PCI), ATI Rage 128 Mobility LF (AGP),
> (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD
> (AGP),
> ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP)
> (--) Chipset ATI Rage 128 Mobility LF (AGP) found
> (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
> (II) Module r128: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 4.0.1
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 0.1.0
> (II) R128(0): PCI bus 0 card 16 func 0
> (**) R128(0): Depth 24, (--) framebuffer bpp 32
> (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
> (==) R128(0): Default visual is TrueColor
> (==) R128(0): RGB weight 888
> (II) R128(0): Using 8 bits per RGB (8 bit DAC)
> (**) R128(0): Using framebuffer device
> (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
> (II) Module fbdevhw: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 0.0.2
> (--) R128(0): Chipset: "ATI Rage 128 Mobility LF (AGP)" (ChipID = 0x4c46)
> (--) R128(0): Linear framebuffer at 0x94000000
> (--) R128(0): MMIO registers at 0x90000000
> (--) R128(0): BIOS at 0x90020000
> (**) R128(0): Turned flat panel register programming off
> (WW) R128(0):
>
> WARNING: Forcing the driver to use/not use the flat panel registers
> might damage your flat panel. Use at your *OWN* *RISK*.
>
> (--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1)
> (WW) R128(0): Video BIOS not detected in PCI space!
> (WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
> (WW) R128(0): Video BIOS not found!
> (II) R128(0): PLL parameters: rf=2950 rd=59 min=12500
> max=25000; xclk=10500
> (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
> (II) R128(0): Generic Monitor: Using hsync range of 28.00-38.00 kHz
> (II) R128(0): Generic Monitor: Using vrefresh range of 43.00-65.00 Hz
> (II) R128(0): Clock range: 12.50 to 250.00 MHz
> (WW) R128(0): Default mode "640x350" deleted (vrefresh out of range)
> (WW) R128(0): Default mode "640x400" deleted (vrefresh out of range)
> (WW) R128(0): Default mode "720x400" deleted (vrefresh out of range)
> (WW) R128(0): Default mode "640x480" deleted (vrefresh out of range)
> (WW) R128(0): Default mode "640x480" deleted (vrefresh out of range)
> (WW) R128(0): Default mode "640x480" deleted (hsync out of range)
> (WW) R128(0): Default mode "800x600" deleted (hsync out of range)
> (WW) R128(0): Default mode "800x600" deleted (hsync out of range)
> (WW) R128(0): Default mode "800x600" deleted (hsync out of range)
> (WW) R128(0): Default mode "1024x768" deleted (vrefresh out of range)
> (WW) R128(0): Default mode "1024x768" deleted (hsync out of range)
> (WW) R128(0): Default mode "1024x768" deleted (hsync out of range)
> (WW) R128(0): Default mode "1024x768" deleted (hsync out of range)
> (WW) R128(0): Default mode "1024x768" deleted (hsync out of range)
> (WW) R128(0): Default mode "1152x864" deleted (hsync out of range)
> (WW) R128(0): Default mode "1280x960" deleted (hsync out of range)
> (WW) R128(0): Default mode "1280x960" deleted (hsync out of range)
> (WW) R128(0): Default mode "1280x1024" deleted (hsync out of range)
> (WW) R128(0): Default mode "1280x1024" deleted (hsync out of range)
> (WW) R128(0): Default mode "1280x1024" deleted (hsync out of range)
> (WW) R128(0): Default mode "1600x1200" deleted (hsync out of range)
> (WW) R128(0): Default mode "1600x1200" deleted (hsync out of range)
> (WW) R128(0): Default mode "1600x1200" deleted (hsync out of range)
> (WW) R128(0): Default mode "1600x1200" deleted (hsync out of range)
> (WW) R128(0): Default mode "1600x1200" deleted (hsync out of range)
> (WW) R128(0): Default mode "1792x1344" deleted (insufficient memory for
> mode)
> (WW) R128(0): Default mode "1792x1344" deleted (insufficient memory for
> mode)
> (WW) R128(0): Default mode "1856x1392" deleted (insufficient memory for
> mode)
> (WW) R128(0): Default mode "1856x1392" deleted (insufficient memory for
> mode)
> (WW) R128(0): Default mode "1920x1440" deleted (insufficient memory for
> mode)
> (WW) R128(0): Default mode "1920x1440" deleted (insufficient memory for
> mode)
> (--) R128(0): Virtual size is 800x600 (pitch 832)
> (**) R128(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
> (++) R128(0): DPI set to (75, 75)
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 0.1.0
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor="The XFree86 Project"
> compiled for 4.0.2, module version = 1.0.0
> (--) Depth 24 pixmap format is 32 bpp
> (II) R128(0): Memory manager initialized to (0,0) (832,2520)
> (II) R128(0): Reserved area from (0,600) to (832,602)
> (II) R128(0): Largest offscreen area available: 832 x 1918
> (==) R128(0): Backing store disabled
> (==) R128(0): Silken mouse enabled
> (II) R128(0): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> 8x8 mono pattern filled rectangles
> Indirect CPU to Screen color expansion
> Solid Lines
> Dashed Lines
> Offscreen Pixmaps
> Setting up tile and stipple cache:
> 32 128x128 slots
> 13 256x256 slots
> (II) R128(0): Acceleration enabled
> (II) R128(0): Using hardware cursor (scanline 2408)
> (II) R128(0): Largest offscreen area available: 832 x 1915
> (WW) R128(0): Option "HWcursor" is not used
> (WW) R128(0): Option "HWcursor" is not used
> PEXExtensionInit: Couldn't open default PEX font file Roman_M
> (II) Keyboard "Generic Keyboard" handled by legacy driver
> (**) Generic Mouse: Protocol: "ImPS/2"
> (**) Generic Mouse: Core Pointer
> (==) Generic Mouse: Buttons: 3
> (**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50
> (**) Generic Mouse: ZAxisMapping: buttons 4 and 5
> (II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
>
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>
>
