Hello, I am just curious if anyone is working on getting the PCI-PCI
bridge code working for the UMAX S900 (similar to 9500, but
obviously different enough to break the code). The problem is this:
all cards not in slots 1-2 are assigned an IRQ of 1, which is
obviously wrong. I'm not sure why slot 3 does not work, however,
unless the code just thinks the PCI bridge *is* slot 3 (which it does
appear to be that way).
If no one is currently attempting to fix it, but someone would like to,
here is all of the relevant info I can think of. Thanks in advance for
any help.
Location of the pci bridge in /proc is:
/proc/device-tree/bandit/pci-bridge/AAPL,interrupts
colour:/home/jingai# lspci
00:0b.0 Host bridge: Apple Computer Inc. Bandit PowerPC host bridge (rev
03)
00:0d.0 Unknown mass storage controller: Promise Technology, Inc. 20267
(rev 02)
00:0e.0 USB Controller: OPTi Inc. 82C861 (rev 10)
00:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21052 (rev 01)
00:10.0 Class ff00: Apple Computer Inc. Grand Central I/O (rev 02)
01:01.0 VGA compatible controller: ATI Technologies Inc Rage 128 RE
01:02.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink]
(rev 30)
colour:/home/jingai# lspci -vv
00:0b.0 Host bridge: Apple Computer Inc. Bandit PowerPC host bridge (rev
03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32, cache line size 08
00:0d.0 Unknown mass storage controller: Promise Technology, Inc. 20267
(rev 02)
Subsystem: Promise Technology, Inc.: Unknown device 4d33
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 2070 [size=8]
Region 1: I/O ports at 2060 [size=4]
Region 2: I/O ports at 2050 [size=8]
Region 3: I/O ports at 2040 [size=4]
Region 4: I/O ports at 2000 [size=64]
Region 5: Memory at 88020000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at 88010000 [disabled] [size=64K]
Capabilities: [58] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI])
Subsystem: OPTi Inc. 82C861
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 24
Region 0: Memory at 88000000 (32-bit, non-prefetchable) [size=4K]
00:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21052 (rev 01)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80800000-87ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:10.0 Class ff00: Apple Computer Inc. Grand Central I/O (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 32, cache line size 08
Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=128K]
01:01.0 VGA compatible controller: ATI Technologies Inc Rage 128 RE
(prog-if 00 [VGA])
Subsystem: Unknown device b530:0408
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 1
Region 0: Memory at 84000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at 1000 [size=256]
Region 2: Memory at 80804000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at 80840000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:02.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink]
(rev 30)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC
Management NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 1
Region 0: I/O ports at 1400 [size=128]
Region 1: Memory at 80800000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 80820000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
