There is loads’s shet you need to turn off on the NIC with the floppy disk from a PC… no automatic stuff… no Full duplex and so on…
On mandag 4. desember 2000, Jonathan Lane <[EMAIL PROTECTED]> wrote: >Okay, I swapped cards around, and it turns out that *anything* in >PCI slots 3-6 are not correctly configured (this is on a UMAX S900). >I moved the USB card and NIC to slots 1 and 2, and my video card >to slot 4, which appears to be working (although I've not tried >using X yet, as XF86 4.0.1 is currently broken...). > >However, now I am having another problem: When I ping the machine, >I see the RX light on the NIC flash, but the source machine doesn't >get any responses. > >A few things to note: Every once in a while, I see the following >message: > > eth1: Setting promiscuous mode. > >Also, in my syslog, dhcpd complains with: > >Aug 27 16:42:20 colour dhcpd-2.2.x: DHCPDISCOVER from 08:00:46:05:9c:c8 via >eth1 >Aug 27 16:42:20 colour dhcpd-2.2.x: no free leases on subnet >192.168.1.0 > >(Ignore the date, my clock had yet to be set). But this indicates that >packets *are* getting thru, as the MAC address shown above is >correct. > >If anyone can shed some light on this matter, I'd greatly appreciate it. >I'd also like to know why the last four PCI slots don't work properly, >although it appears it's not incredibly important now, unless X doesn't >work... > >TIA, >Jonathan > > >-- >To UNSUBSCRIBE, email to [EMAIL PROTECTED] >with a subject of "unsubscribe". Trouble? Contact >[EMAIL PROTECTED] >
