On Wed, Nov 22, jon ewing wrote:
> At 22/11/2000, 11:34, Michel Dänzer wrote:
> >jon ewing wrote:
> >
> > > I can get a 1600x1200 console when I first boot my G4 - after starting X
> > > I'm no longer able to get back to the console and the only solution is to
> > > switch the power off at the mains. I guess thats not normal, right?
> >
> >Use fbset -x to get a modeline for the mode you have in console. If that
> >doesn't work, it's probably an r128 driver bug.
>
> Hi Michel,
>
> At the console, fbset -x gives me:
>
> Mode "1600x1200"
> # D: 100.000 MHz, H: 60.976 kHz, V: 49.174 Hz
> DotClock 100.001
> HTimings 1600 1616 1624 1640
> VTimings 1200 1216 1224 1240
> Flags "-HSync" "-VSync"
> EndMode
>
> I added the modeline in my XF86Config to read:
>
> Modeline "1600x1200" 100.001 1600 1616 1624 1640 1200 1216 1224 1240 -HSync
> -VSync
>
> But starting X still goes to a blank screen and the only thing I can do is
> power-off. /var/log/XFree86.0.log doesn't report any problems.
>
> I guess its a bug in the driver then :-(
Try one of these:
ModeLine "[EMAIL PROTECTED]" 162.00 1600 1664 1856 2160 1200 1201 1204 1250
+hsync +vsync
ModeLine "[EMAIL PROTECTED]" 175.50 1600 1664 1856 2160 1200 1201 1204 1250
+hsync +vsync
ModeLine "[EMAIL PROTECTED]" 189.00 1600 1664 1856 2160 1200 1201 1204 1250
+hsync +vsync
ModeLine "[EMAIL PROTECTED]" 202.50 1600 1664 1856 2160 1200 1201 1204 1250
+hsync +vsync
ModeLine "[EMAIL PROTECTED]" 229.50 1600 1664 1856 2160 1200 1201 1204 1250
+hsync +vsync
put that in /etc/syslog.conf
*.* -/var/log/allmessages
I can use 1600x1200 with 85hz
Gruss Olaf
--
$ man clone
BUGS
Main feature not yet implemented...
