Hi, i have a Rev 1 blue G3 with the ATI128 card, i am running kernel 2.2.15 from pauls tree (pre20, will be final 2.2.15 next time i reboot)
ever since i started using kernels with aty128 frambuffer support
(2.2.14) i have had this really agrivating problem: whenever i switch
VCs, almost without fail the screen goes black for about 2 full
seconds then slowly fades back in. its as if it goes into powersave
for a second and wakes up again. its driving me INSANE!!
1) has anyone else with this hardware seen this obnoxious behavior?
2) does anyone have any idea how to fix this obnoxious behavior?
here is fbset -v -s -i output:
Linux Frame Buffer Device Configuration Version 2.1 (23/06/1999)
(C) Copyright 1995-1999 by Geert Uytterhoeven
Opening frame buffer device `/dev/fb0'
Using current video mode from `/dev/fb0'
mode "1024x768-75"
# D: 78.740 MHz, H: 60.015 kHz, V: 75.019 Hz
geometry 1024 768 1024 768 8
timings 12700 158 34 28 1 96 3
hsync high
vsync high
rgba 8/0,8/0,8/0,0/0
endmode
Getting further frame buffer information
Frame buffer device information:
Name : ATY Rage128
Address : 0x88000000
Size : 16777216
Type : PACKED PIXELS
Visual : PSEUDOCOLOR
XPanStep : 8
YPanStep : 1
YWrapStep : 0
LineLength : 1024
MMIO Address: 0x80900000
MMIO Size : 8191
Accelerator : Unknown (32)
I use the VCs extensivly and this problem really makes that hard. and
BTW i do not run X on this machine.
TIA
--
Ethan Benson
http://www.alaska.net/~erbenson/
pgp75FiPamokO.pgp
Description: PGP signature
