Okay, I'm using 2.6.12-rc2 with your patches as downloaded today. (Don't know what's responsible for the Zilog and dm errors below, I'm using Ubuntu Hoary's config from 2.6.10 brought forward with make oldconfig.) No Firewire or USB devices attached. I'm booting without X ever running and without the radeon module loaded. I've pasted my lsmod, dmesg and /proc/cpuinfo below.
The experience has actually been a little bizarre. The first time I tried waking it up (with HAL running), it put some stuff about radeon and eth0 on the screen and then froze. Couldn't SSH in, caps lock key light was working. I figured I'd try again without HAL and capture the text of this particular error later. So I rebooted, turned HAL off, and slept it. I was delighted to see that it woke back up. But when I tried to do anything, it seemed unable to access the disk. [EMAIL PROTECTED]:~ # ll /etc /bin/ls- Success Trying dmesg, it complained it didn't know about /bin/dmesg. Couldn't SSH in, either. So I rebooted. Now, any time I sleep, it just wakes back up to a black screen, HAL or no HAL. Steve ------------------------- [EMAIL PROTECTED]:~ # lsmod Module Size Used by cpufreq_userspace 5676 1 cpufreq_powersave 2016 0 cpufreq_ondemand 8060 0 ipv6 328040 15 af_packet 21480 2 ide_cd 51492 0 cdrom 50716 1 ide_cd sungem 38852 0 sungem_phy 10368 1 sungem ohci1394 42516 0 ieee1394 443504 1 ohci1394 ohci_hcd 26468 0 usbcore 146164 2 ohci_hcd uninorth_agp 11272 1 agpgart 44188 1 uninorth_agp evdev 12160 2 tsdev 9344 0 md 56156 0 dm_mod 73140 0 ext3 153320 1 jbd 72600 1 ext3 mbcache 11244 1 ext3 ide_disk 21952 3 via82cxxx 14876 0 [permanent] trm290 5762 0 [permanent] sl82c105 8032 0 [permanent] siimage 14944 0 [permanent] sc1200 10464 0 [permanent] pdc202xx_old 14240 0 [permanent] pdc202xx_new 13600 0 [permanent] ns87415 5092 0 [permanent] hpt366 24480 0 [permanent] hpt34x 6464 0 [permanent] generic 5248 0 [permanent] cmd64x 14780 0 [permanent] aec62xx 9280 0 [permanent] unix 32532 166 [EMAIL PROTECTED]:~ # cat /proc/cpuinfo processor : 0 cpu : 750FX temperature : 11-13 C (uncalibrated) clock : 400MHz revision : 1.18 (pvr 7000 0112) bogomips : 793.45 machine : PowerBook4,3 motherboard : PowerBook4,3 MacRISC2 MacRISC Power Macintosh detected as : 257 (iBook 2 rev. 2) pmac flags : 0000001b L2 cache : 512K unified memory : 640MB pmac-generation : NewWorld [EMAIL PROTECTED]:~ # dmesg Total memory = 640MB; using 2048kB for hash table (at c0400000) Linux version 2.6.12-rc2-1 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #2 Sat Apr 16 13:58:50 PDT 2005 Found UniNorth memory controller & host bridge, revision: 192 Mapped at 0xfdf00000 Found a Pangea mac-io controller, rev: 0, mapped at 0xfde80000 Processor NAP mode on idle enabled. PowerMac motherboard: iBook 2 rev. 2 Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0 via-pmu: Server Mode is disabled PMU driver 2 initialized for Core99, firmware: 0c nvram: Checking bank 0... nvram: gen0=693, gen1=692 nvram: Active bank is: 0 nvram: OF partition at 0x410 nvram: XP partition at 0x1020 nvram: NR partition at 0x1120 On node 0 totalpages: 163840 DMA zone: 163840 pages, LIFO batch:16 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: root=/dev/hda4 ro quiet splash PowerMac using OpenPIC irq controller at 0x80040000 OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc62f000 OpenPIC timer frequency is 4.160000 MHz PID hash table entries: 4096 (order: 12, 65536 bytes) GMT Delta read from XPRAM: -480 minutes, DST: off time_init: decrementer frequency = 24.835213 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 639168k available (1892k kernel code, 1184k data, 176k init, 0k highmem) AGP special page: 0xe7fff000 Calibrating delay loop... 1388.54 BogoMIPS (lpj=694272) Mount-cache hash table entries: 512 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 4376k freed NET: Registered protocol family 16 PCI: Probing PCI hardware Registering openpic with sysfs... Thermal assist unit using timers, shrink_timer: 2000 jiffies Registering PowerMac CPU frequency driver Low: 400 Mhz, High: 700 Mhz, Boot: 700 Mhz audit: initializing netlink socket (disabled) audit(1113690133.143:0): initialized devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 Initializing Cryptographic API PCI: Enabling device 0000:00:10.0 (0086 -> 0087) radeonfb (0000:00:10.0): Invalid ROM signature 8080 should be0xaa55 radeonfb: Retreived PLL infos from Open Firmware radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=166.00 Mhz, System=166.00 MHz radeonfb: PLL min 12000 max 35000 radeonfb: Monitor 1 type LCD found radeonfb: EDID probed radeonfb: Monitor 2 type no found radeonfb: Using Firmware dividers 0x0001003a from PPLL 0 radeonfb: Dynamic Clock Power Management enabled Console: switching to colour frame buffer device 128x48 Registered "ati" backlight controller,level: 15/15 radeonfb (0000:00:10.0): ATI Radeon LY Generic RTC Driver v1.07 Macintosh non-volatile memory driver v1.1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled IN from bad port 3f9 at c0126720 IN from bad port 3f9 at c0126720 IN from bad port 3f9 at c0126720 IN from bad port 2f9 at c0126720 IN from bad port 2f9 at c0126720 IN from bad port 2f9 at c0126720 IN from bad port 3e9 at c0126720 IN from bad port 3e9 at c0126720 IN from bad port 3e9 at c0126720 IN from bad port 2e9 at c0126720 IN from bad port 2e9 at c0126720 IN from bad port 2e9 at c0126720 pmac_zilog: 0.6 (Benjamin Herrenschmidt <[EMAIL PROTECTED]>) pmac_zilog: Error registering serial device, disabling pmac_zilog. pmac_zilog: Did another serial driver already claim the minors? io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize MacIO PCI driver attached to Pangea chipset input: Macintosh mouse button emulation Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx adb: starting probe task... adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f ADB keyboard at 2, handler 1 Detected ADB keyboard, type ANSI. input: ADB keyboard on adb2:2.c3/input input: ADB Powerbook buttons on adb7:7.1f/input ADB mouse at 3, handler set to 4 (trackpad) input: ADB mouse on adb3:3.01/input adb: finished probe task... ide0: Found Apple KeyLargo ATA-4 controller, bus ID 2, irq 19 Probing IDE interface ide0... hda: TOSHIBA MK4019GAX, ATA DISK drive hdb: TOSHIBA DVD-ROM SD-R2102, ATAPI CD/DVD-ROM drive hda: Enabling Ultra DMA 2 ide0 at 0xe900e000-0xe900e007,0xe900e160 on irq 19 mice: PS/2 mouse device common for all mice Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4376KiB [1 disk] into ram disk... done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 176k init 4k chrp 32k prep NET: Registered protocol family 1 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(33) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: [mac] p1 p2 p3 p4 p5 p6 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Adding 655352k swap on /dev/hda3. Priority:-1 extents:1 EXT3 FS on hda4, internal journal device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table device-mapper: dm-linear: Device lookup failed device-mapper: error adding target to table ts: Compaq touchscreen protocol output Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected Apple UniNorth/Pangea chipset agpgart: configuring for size idx: 4 agpgart: AGP aperture is 16M @ 0x0 usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: Enabling device 0001:10:18.0 (0000 -> 0002) ohci_hcd 0001:10:18.0: Apple Computer Inc. KeyLargo/Pangea USB ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1 ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Enabling device 0001:10:19.0 (0000 -> 0002) ohci_hcd 0001:10:19.0: Apple Computer Inc. KeyLargo/Pangea USB (#2) ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2 ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1250 $ Ben Collins <[EMAIL PROTECTED]> ohci1394: fw-host0: Unexpected PCI resource length of 1000! ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) PHY ID: 4061e4, addr: 0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:b9:90:1c eth0: Found BCM5221 PHY ieee1394: Host added: ID:BUS[0-00:1023] GUID[000393fffeb9901c] hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 NET: Registered protocol family 17 eth0: Link is up at 100 Mbps, full-duplex. eth0: Pause is disabled NET: Registered protocol family 10 Disabled Privacy Extensions on device c02746d8(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
