On 20:28 Wed 09 Mar , Ben Hill wrote: > Sorry, correction, I get: > > message=lnxreq_ifstate > ifstate=enable > resultcode=implementation_failure Sorry, then I don't know any further :-( In my case, it looks that way:
kernel:
usb 2-1: new full speed USB device using ohci_hcd and address 4
prism2usb_init: prism2_usb.o: 0.2.1-pre25 Loaded
prism2usb_init: dev_info is: prism2_usb
usbcore: registered new driver prism2_usb
Writing 4096 bytes to ram @0x7e2ffe
Writing 4096 bytes to ram @0x7e3ffe
Writing 4096 bytes to ram @0x7e4ffe
Writing 4096 bytes to ram @0x7e5ffe
[...]
Writing 3288 bytes to ram @0x7fe000
ident: nic h/w: id=0x8026 1.0.0
ident: pri f/w: id=0x15 1.1.3
ident: sta f/w: id=0x1f 1.8.3
MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/15
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: 000000000000
linkstatus=CONNECTED
wlanctl:
message=lnxreq_ifstate
ifstate=enable
resultcode=success
But I doubt that this stuff helps... anyway, good luck, Moritz
PS: Are you using the source from the debian repository? That didn't work for
me, it was somehow patched. I needed the official one.
pgpdRCSjNBcfL.pgp
Description: PGP signature
