Hi, Check settings for tty1 in /etc/inittab. >
I checked inittab diff between normal working non-live wheezy installation and running live iso-hybrid. There are differences, but I do not think that significant: user@kiosk:~/work$ diff -u inittab.host inittab.live --- inittab.host 2011-01-01 08:35:05.000000000 +0300 +++ inittab.live 2012-04-17 03:58:46.000000000 +0400 @@ -51,19 +51,19 @@ # Note that on most Debian systems tty7 is used by the X Window System, # so if you want to add more getty's go ahead but skip tty7 if you run X. # -1:2345:respawn:/sbin/getty 38400 tty1 -2:23:respawn:/sbin/getty 38400 tty2 -3:23:respawn:/sbin/getty 38400 tty3 -4:23:respawn:/sbin/getty 38400 tty4 -5:23:respawn:/sbin/getty 38400 tty5 -6:23:respawn:/sbin/getty 38400 tty6 +1:2345:respawn:/bin/login -f user </dev/tty1 >/dev/tty1 2>&1 +2:23:respawn:/bin/login -f user </dev/tty2 >/dev/tty2 2>&1 +3:23:respawn:/bin/login -f user </dev/tty3 >/dev/tty3 2>&1 +4:23:respawn:/bin/login -f user </dev/tty4 >/dev/tty4 2>&1 +5:23:respawn:/bin/login -f user </dev/tty5 >/dev/tty5 2>&1 +6:23:respawn:/bin/login -f user </dev/tty6 >/dev/tty6 2>&1 # Example how to put a getty on a serial line (for a terminal) # -#T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100 -#T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100 +#T0:23:respawn:/bin/login -f user </dev/tty >/dev/tty 2>&1 +#T1:23:respawn:/bin/login -f user </dev/tty >/dev/tty 2>&1 # Example how to put a getty on a modem line. # -#T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3 +#T3:23:respawn:/bin/login -f user </dev/tty >/dev/tty 2>&1 [END OF DIFF] The main change in the file /sbin/getty replaced by /bin/login. I dont think it can affect X start behavior... I want to ask those who use live wheezy, do you have the same problem or it is only on my builds?
