Greetings, Battery status is not updated after installing gnome-power-manager. Battery status is not updated after installing xfce-power-manager.
xfce-power-manager has no activity while running top? The time remains constant > 1439 root 20 0 17772 6664 4900 S 0.0 1.4 0:00.51 xfce4-power-man /sys/class/power_supply/BAT0/charge_now is not updated unless user suspends or reboots. Hardware is Digital Research WebDT 366 LX root@lxdeb6:/var/log# lspci 00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 30) 00:01.1 VGA compatible controller: Advanced Micro Devices [AMD] Geode LX Video 00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX AES Security Block 00:0d.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01) 00:0d.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01) 00:0e.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) 00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (rev 03) 00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01) 00:0f.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio (rev 01) 00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02) 00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02) Here is dmesg log if it helps > http://pastebin.com/JWzyccuQ Also related to the issue, after installing xfce4-power-manager the power button is broken. With xfce4-power-manager installed I should be prompted "what do do, power button pressed" There is no activity when pressing the power button. Prior to installing power-man, the system would halt when pressing the power button. also plugging in power adapter does not have any impact. When using gnome-power-manager The only system activity I can tell happening when pluging/unplugging A/C adapter is power-save state changes according to pm-powersave.log When using xfce4-power-manager pm-powersave.log is not update by power adapter plug/unplug. I'm assuming this is normal because xfce4-power-manager does not have a default profile for "while on batt" vs. "while on A/C" I'm not sure what else to provide. Thanks in advance for taking the time. Eric -- To UNSUBSCRIBE, email to debian-laptop-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/52c4e788-35be-4511-8268-16bbed92b...@carry-her.com
