On Mon, Sep 28, 2009 at 08:33, Imre Vida <i.v...@bio.gla.ac.uk> wrote:

>
> hi
>
> may be a very trivial  question, but have you switched to
> 4 GB under "Processor type and features/High Memory Support"
> in the kernel config?
>
> imre
>
>
Hello Imre,

indeed, I had *not* switched to 4 GB.  It was very trivial, and in the past
I did had 4GB set.  At some point I must have changed it (I don't recall
doing it, but I did it anyway), and since I previously had it set to 4GB, I
did not think of that.  Then, probably, even if I saw it, I overlooked it,
since I mistakenly thought that the 4GB setting was for 4GB or more.

Once I set the switch to 4 GB all my RAM "returned" ;)

Thank you for your reply.

Regards,

Jonás.


>
> On Sat, Sep 26, 2009 at 03:44:15PM +0200, j.andra...@gmail.com wrote:
> >    Hello,
> >
> >    last week, when booting a virtual machine, I discovered that my laptop
> >    only recognizes one of the RAM modules (supposed to be 1 GB, but truly
> >    providing 880 MB).  I realized this when VirtualBox complained that I
> had
> >    configured more than the available RAM to the virtual machine.  I had
> not
> >    changed the virtual machine configuration, and the virtual machine had
> >    about 950 MB assigned (and my physical host, only had 880 MB).
> >
> >    Since I previously had 2 GB of RAM, I assumed one of the chips was
> broken
> >    somehow.  I replaced one of them, and I still got this output for the
> >    "free" command:
> >
> >    $ free
> >                     total       used       free     shared    buffers
> >    cached
> >    Mem:        902264     892608       9656          0      23624
> 621432
> >
> >    So I put the original module back on, and changed the other one.  I
> >    entered the BIOS, and it detected 2048 MB of RAM.   I run a test on
> the
> >    memory (from the BIOS), and everything seemed allright.  But my Debian
> >    keeps seeing only 902264 of RAM.
> >
> >    I downloaded a new Kernel, re-compiled, but everything is still the
> same.
> >    I am running Debian Sid, if that could matter, but I can't see how
> that
> >    would affect the amount of RAM available.
> >
> >    Running lshw, I get the following ouput:
> >
> >         *-memory
> >              description: System Memory
> >              physical id: a
> >              slot: System board or motherboard
> >              size: 2GiB
> >            *-bank:0
> >                 description: SODIMM DDR2 Synchronous 533 MHz (1.9 ns)
> >                 product: 9905293-014.A00LF
> >                 vendor: 7F98000000000000
> >                 physical id: 0
> >                 serial: 41CC9DE7
> >                 slot: DIMM #1
> >                 size: 1GiB
> >                 width: 64 bits
> >                 clock: 533MHz (1.9ns)
> >            *-bank:1
> >                 description: SODIMM DDR2 Synchronous 667 MHz (1.5 ns)
> >                 product: 9905295-066.A00LF
> >                 vendor: 7F98000000000000
> >                 physical id: 1
> >                 serial: 66078142
> >                 slot: DIMM #2
> >                 size: 1GiB
> >                 width: 64 bits
> >                 clock: 667MHz (1.5ns)
> >
> >    Could the difference between the clocks available on the RAM chips
> only
> >    allow for one of them to be used?
> >
> >    Thank you in advance,
> >
> >    Best Regards,
> >
> >    --
> >    Jonás Andradas
> >
> >    Skype: jontux
> >    LinkedIn: http://www.linkedin.com/in/andradas
> >    GPG Fingerprint:  678F 7BD0 83C3 28CE 9E8F
> >                              3F7F 4D87 9996 E0C6 9372
> >    Keyservers:  pgp.mit.edu | pgp.rediris.es
>
>
>
> --
> Imre Vida, M.D., Ph.D.
> Division of Neuroscience and Biomedical Systems
> IBLS, University of Glasgow
> West Medical Building
> Glasgow, G12 8QQ, U.K.
> Tel.: 0044 141 330 5143
> Fax.: 0044 141 330 5481
> eMail: i.v...@bio.gla.ac.uk
> --
>
>
> --
> To UNSUBSCRIBE, email to debian-laptop-requ...@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmas...@lists.debian.org
>
>

Reply via email to