How can I mount an SD card (via USB card reader) to have a specific
filename encoding on Ubuntu Feisty 7.04? My laptop is UTF-8, but the
SD card in my Nokia 6288 seems to be CP1255 or ISO-8859-8. The Hebrew
filenames show up as question marks, not letters. So if on the Nokia I
make three directories on the card:
EnglishDir
תיקייהעברית
עודאחד2
Then this is what I see on my laptop:
EnglishDir
???????????
??????2
What mount command should I use? I read man mount and I see no mention
of encodings. The card is Fat32, formated by me on a windows machine.
$ sudo mount -o codepage=1225,iocharset=iso8859-8,utf8 -t vfat
/dev/sdb1 /media/usb
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
-- snip from the end of dmesg --
[420043.556000] usb 2-1: new low speed USB device using uhci_hcd and address 6
[420043.756000] usb 2-1: configuration #1 chosen from 1 choice
[420043.804000] input: HID 1241:1177 as /class/input/input44
[420043.804000] input: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:1d.1-1
[420704.856000] usb 3-1: new high speed USB device using ehci_hcd and address 26
[420704.988000] usb 3-1: configuration #1 chosen from 1 choice
[420704.988000] scsi7 : SCSI emulation for USB Mass Storage devices
[420704.988000] usb-storage: device found at 26
[420704.988000] usb-storage: waiting for device to settle before scanning
[420709.988000] usb-storage: device scan complete
[420709.988000] scsi 7:0:0:0: Direct-Access Generic USB SD Reader
1.00 PQ: 0 ANSI: 0
[420709.988000] scsi 7:0:0:1: Direct-Access Generic USB CF Reader
1.01 PQ: 0 ANSI: 0
[420709.988000] scsi 7:0:0:2: Direct-Access Generic USB SM Reader
1.02 PQ: 0 ANSI: 0
[420709.988000] scsi 7:0:0:3: Direct-Access Generic USB MS Reader
1.03 PQ: 0 ANSI: 0
[420710.176000] SCSI device sdb: 1984000 512-byte hdwr sectors (1016 MB)
[420710.180000] sdb: Write Protect is off
[420710.180000] sdb: Mode Sense: 03 00 00 00
[420710.180000] sdb: assuming drive cache: write through
[420710.180000] SCSI device sdb: 1984000 512-byte hdwr sectors (1016 MB)
[420710.180000] sdb: Write Protect is off
[420710.180000] sdb: Mode Sense: 03 00 00 00
[420710.180000] sdb: assuming drive cache: write through
[420710.180000] sdb: sdb1
[420710.184000] sd 7:0:0:0: Attached scsi removable disk sdb
[420710.184000] sd 7:0:0:0: Attached scsi generic sg2 type 0
[420710.188000] sd 7:0:0:1: Attached scsi removable disk sdc
[420710.188000] sd 7:0:0:1: Attached scsi generic sg3 type 0
[420710.188000] sd 7:0:0:2: Attached scsi removable disk sdd
[420710.188000] sd 7:0:0:2: Attached scsi generic sg4 type 0
[420710.192000] sd 7:0:0:3: Attached scsi removable disk sde
[420710.192000] sd 7:0:0:3: Attached scsi generic sg5 type 0
[420951.876000] Unable to load NLS charset cp1225
[420951.876000] FAT: codepage cp1225 not found
Might I need to install codepage cp1225? Is that something
installable? Thanks in advance.
Dotan Cohen
http://what-is-what.com
http://gibberish.co.il
א-ב-ג-ד-ה-ו-ז-ח-ט-י-ך-כ-ל-ם-מ-ן-נ-ס-ע-ף-פ-ץ-צ-ק-ר-ש-ת
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
