hi! sorry to say, but all docs i found refer to do: a) install kernel sources, sometimes b) install newer kernel + sources but all say c) install latest ndiswraper. "error -71" apears quit often in the groups, seams to be something with power supply (???) - at least when the plugged unit is a disk drive or similar. i haven't seen something with a solution mentioning a wlan stich and error -7. but i've seen another - german - success storry with the same stick at http://www.unixboard.de/vb3/archive/index.php/t-25667.html - again, install kernel sources and latest ndiswrapper. maybe you can find some help there:
http://www.wlanfr.net http://www.alionet.org/lofiversion/index.php/t13870.html nik Am Donnerstag, 8. Februar 2007 19:25 schrieb Thibaud Hulin: > Thanks for your explains ! > I used the link on your page to download and install ndiswrapper common, > source and utils. > But I don't know where are the -modules ? > Waiting, I tried to get on the dongle, and after a couple of seconds, I > got these errors : > usb 1-1: device descriptor read/64, error -71 > Now, lsusb don't recognize my dongle... > > Thibaud. > > Dr. Nikolaus Klepp a écrit : > > hi! > > the solution presented there is this: > > > > 1) install the right kernel module (on the example it was kernel > > 2.6.18.4-slh-up-1) - replace '...2.6.18.4-slh-up-1_1.28-1+1_i386' with > > whatever kernel you use: > > # dpkg -i ndiswrapper-modules-2.6.18.4-slh-up-1_1.28-1+1_i386.deb > > > > 2) install ndiswrapper-utils 1.9: > > # dpkg -i ndiswrapper-utils-1.9_1.30-1_i386 > > > > that should do the job. hope it warkes for you, too > > > > nik > > > > Am Mittwoch, 7. Februar 2007 22:16 schrieb Thibaud Hulin: > >> Thanks for your help Dr Nikolaus. Must I install > >> ndiswrapper-utils-1.8.deb ? Because I tried, and it failed. But I'm > >> sorry, I don't understand german. Can you explain, please ? > >> > >> Dr. Nikolaus Klepp a écrit : > >>>> Bus 001 Device 002: ID 0457:0163 Silicon Integrated Systems Corps. > >>>> Bus 001 Device 001: ID 0000:0000 > >>> > >>> ID 0000:0000 is the usb hub. there you plug your devices. > >>> > >>> akkording to http://sidux.com/PNphpBB2-viewtopic-t-68.html there is > >>> problem at least with kanotix + kernel 2.6.18.4-slh-up-1 + wlan stick. > >>> > >>> nik
