Hi all, I kept trying to connect using my wireless card but so far
still couldn't get it work.
Here is my ifconfig -a output
eth0 Link encap:Ethernet HWaddr 00:0E:7B:CB:C2:17
inet addr:192.168.1.35 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20e:7bff:fecb:c217/64 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3801 errors:0 dropped:0 overruns:0 frame:0
TX packets:3863 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2256400 (2.1 MiB) TX bytes:752250 (734.6 KiB)
eth1 Link encap:UNSPEC HWaddr
00-00-39-00-00-50-3E-A3-00-00-00-00-00-00-00-00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth2 Link encap:Ethernet HWaddr 00:0E:35:3C:21:00
inet6 addr: fe80::20e:35ff:fe3c:2100/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:164 errors:72 dropped:5937 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:864 (864.0 b)
Interrupt:11 Base address:0x8000 Memory:cffff000-cfffffff
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
and iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
eth2 IEEE 802.11g ESSID:"ZyXEL"
Mode:Managed Frequency:2.462 GHz Access Point: 00:13:49:54:A7:A1
Bit Rate:54 Mb/s Tx-Power=20 dBm Sensitivity=8/0
Retry limit:7 RTS thr:off Fragment thr:off
Encryption key:0272-9400-00 Security mode:open
Power Management:off
Link Quality=98/100 Signal level=-26 dBm Noise level=-89 dBm
Rx invalid nwid:0 Rx invalid crypt:100 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:5865 Missed beacon:0
sit0 no wireless extensions.
I suppose i'm using ipw2200 as my dmesg|grep ipw2200 gives
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
Please let me know if you need more info, the problem seems like I
couldn't get the ip address for eth2. Anyway, I look forward to your
help as I've been googling around for quite a while. Thanks a lot!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
