On (11/02/06 18:29), Henrique Rennó wrote: > I'm using static. > > ifconfig results: > > eth0 Encapsulamento do Link: Ethernet Endereço de HW 00:C0:9F:88:E6:52 > inet end.: 192.168.0.1 Bcast:192.168.0.255 Masc: 255.255.255.0 > UP BROADCASTRUNNING MULTICAST MTU:1500 Métrica: 1 > RX packets: 0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:105 errors:0 dropped:0 overruns:0 carrier:0 > colisões:0 txqueuelen:1000 > RX bytes:0 (0.0 b) TX bytes:4410 (4.3 KiB) > IRQ:19 Endereço de E/S:0x1800 > lo Encapsulamento do Link: Loopback Local > inet end.: 127.0.0.1 Masc: 255.0.0.0 > UP LOOPBACKRUNNING MTU:16436 Métrica:1 > RX packets:50 errors:0 dropped:0 overruns:0 frame:0 > TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 > colisões:0 txqueuelen:0 > RX bytes:4432 (4.3 KiB) TX bytes:4432 (4.3 KiB) > > My system is in portuguese because I'm brazilian. > > The line before the last line of eth0 has RX bytes:0 (0.0 b), what I > think it's because the network card didn't receive any packages. > > When I type /etc/init.d/networking restart comes: > > Setting up IP spoofing protection: rp_filter. > Reconfiguring network interfaces...ifup: interface lo already configured > done. > aspire:~# eth0: Media Link On 100mbps full-duplex > > This last line hangs and I have to type CTRL+C to return to the shell.
Try setting a different IP address; are you sure nothing else on your network is using that address (router/modem perhaps)? Another thing to try is booting from a Live CD and seeing if the eth0 interface works under that. Regards Clive -- www.clivemenzies.co.uk ... ...strategies for business
