Milan Toth at Mon, Jan 16, 2006 at 02:49:41PM CET wrote: > Ruben at Mon, Jan 16, 2006 at 01:01:37PM CET wrote: > > > > At Mon, 16 Jan 2006 10:22:52 +0100, Milan Toth wrote: > > > > > > > well i have got eventually the AirPort card working WITH WEP SECURITY > > > > ON!!! > > > > > > should I only update bcm43xx and softmac source and WEP will > > > work form me? > > > > Yes, I used the svn from bcm43xx (you could also use a snapshot) and a > > snapshot of softmac. You just need to disable ieee80211 in the > > (vanilla) kernel, since the modified ieee80211 is included in the > > softmac snapshot. A "make install" will install the needed kernel > > modules in /lib/modules for both softmac and bcm43xx. > > OK. So I download a 2.6.15.1 from kernel.org disbale Generic > IEEE 802.11 Networking Stack and try to compile softmac-snapshot > but I'v got error that I dont have IEEE 802.11 compiled into > kernel. So I enbale it compile softmac with this warnning: > > *** Warning: "wireless_send_event" > [/home/data/src/softmac-snapshot/net/ieee80211/softmac/ieee80211softmac.ko] > undefined! > > then: > export SOFTMAC_DIR=/home/data/src/softmac-snapshot > > and compile the bcm43xx driver > with this warnnings: > *** Warning: "free_ieee80211softmac" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211softmac_stop" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211softmac_wx_set_genie" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211softmac_wx_set_wap" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211softmac_wx_get_essid" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211softmac_wx_get_rate" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211softmac_wx_get_wap" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211softmac_wx_set_essid" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211softmac_start" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211softmac_wx_get_genie" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211softmac_wx_get_scan_results" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211_wx_get_auth" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211softmac_wx_trigger_scan" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "alloc_ieee80211softmac" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211_wx_set_auth" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > *** Warning: "ieee80211softmac_wx_set_rate" > [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! > > and finaly when I try to modprobe the bcm4300 I'v got this > error: > [EMAIL PROTECTED]/home/data/src/bcm43xx/driver] sudo > modprobe bcm43xx > WARNING: Error inserting ieee80211softmac > (/lib/modules/2.6.15.1-krachsna-2/kernel/drivers/net/ieee80211softmac/ieee80211softmac.ko): > Unknown symbol in module, or unknown parameter (see dmesg) > FATAL: Error inserting bcm43xx > (/lib/modules/2.6.15.1-krachsna-2/kernel/drivers/net/bcm43xx/bcm43xx.ko): > Unknown symbol in module, or unknown parameter (see dmesg) > > > help me please :(
sorry I forgot to attach dmesg output: ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> ieee80211softmac: Unknown symbol wireless_send_event bcm43xx: Unknown symbol ieee80211softmac_wx_set_rate bcm43xx: Unknown symbol alloc_ieee80211softmac bcm43xx: Unknown symbol ieee80211softmac_wx_trigger_scan bcm43xx: Unknown symbol ieee80211softmac_wx_get_scan_results bcm43xx: Unknown symbol ieee80211softmac_wx_get_genie bcm43xx: Unknown symbol ieee80211softmac_start bcm43xx: Unknown symbol ieee80211softmac_wx_set_essid bcm43xx: Unknown symbol ieee80211softmac_wx_get_wap bcm43xx: Unknown symbol ieee80211softmac_wx_get_rate bcm43xx: Unknown symbol ieee80211softmac_wx_get_essid bcm43xx: Unknown symbol ieee80211softmac_wx_set_wap bcm43xx: Unknown symbol ieee80211softmac_wx_set_genie bcm43xx: Unknown symbol ieee80211softmac_stop bcm43xx: Unknown symbol free_ieee80211softmac > > > > Then you do something like the following: > > --------------- > > #!/bin/bash > > ifconfig eth1 down > > ifconfig eth1 up > > iwconfig eth1 rate 11M > > iwconfig eth1 essid fifi > > iwconfig eth1 key 1230123012301230123012302 > > dhclient eth1 > > --------------- > > > > Adapt everything to your configuration of course, maybe a higher rate > > than 11M is possible according to circumstances, but it works very > > well in my case. A higher rate gives me trouble with dhcp. But for > > the rest it is very stable. (and now the connection works immediately) > > > > -- > Milan Toth .''`. > http://milan.toth-online.com : :' : > [EMAIL PROTECTED] `. `'` > `- > MATH AND ALCOHOL DON'T MIX! > Please don't drink and derive. > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- Milan Toth .''`. http://milan.toth-online.com : :' : [EMAIL PROTECTED] `. `'` `- MATH AND ALCOHOL DON'T MIX! Please don't drink and derive. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
