Dear all I am trying to install the stable release of Debain 3.1 r0a on a Fujitsu Siemens S7020 and have the problem that the SATA disk is not recognized. The hardware should be supported as I can boot with Knoppix and can access the disk.
I have tried to load some of the modules by hand that are loaded by Knoppix (as far as they are available on the installer cd) (ide_generic, libata, ata_piix, ...) but did no succeed. Does any one have an idea how to overcome this problem? The output of lspci gives: --------------------------------- 0000:00:00.0 Host bridge: Intel Corp. Mobile Memory Controller Hub (rev 03) 0000:00:02.0 VGA compatible controller: Intel Corp. Mobile Graphics Controller (rev 03) 0000:00:02.1 Display controller: Intel Corp. Mobile Graphics Controller (rev 03) 0000:00:1b.0 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) 0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) 0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) 0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d4) 0000:00:1f.0 ISA bridge: Intel Corp. 82801FBM (ICH6M) LPC Interface Bridge (rev 04) 0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) 0000:00:1f.2 0106: Intel Corp. 82801FBM (ICH6M) SATA Controller (rev 04) 0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) 0000:02:00.0 Ethernet controller: Broadcom Corporation: Unknown device 167d (rev 11) 0000:06:03.0 CardBus bridge: O2 Micro, Inc.: Unknown device 7134 (rev 20) 0000:06:05.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05) 0000:06:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) --------------------------------- and my knoppix loads the following modules (lsmod) --------------------------------- Module Size Used by autofs4 18820 1 af_packet 20104 0 ext3 124552 1 jbd 65060 1 ext3 ntfs 163728 0 tg3 82180 0 intel_agp 22044 1 agpgart 30512 1 intel_agp i2c_i801 11276 0 i2c_core 21248 1 i2c_i801 ipw2200 127592 0 firmware_class 11264 1 ipw2200 ieee80211 39076 1 ipw2200 ieee80211_crypt 8648 2 ipw2200,ieee80211 parport_pc 38596 0 parport 33480 1 parport_pc 8250 41692 0 serial_core 21120 1 8250 usbhid 42176 0 pcmcia 21776 2 yenta_socket 21896 1 rsrc_nonstatic 12160 1 yenta_socket pcmcia_core 42272 3 pcmcia,yenta_socket,rsrc_nonstatic video 18308 0 thermal 14984 0 processor 24552 1 thermal fan 7300 0 container 7296 0 button 7168 0 battery 12420 0 ac 7556 0 genrtc 12060 0 unionfs 109944 1 cloop 18848 1 sbp2 24456 0 ohci1394 33028 0 ieee1394 300600 2 sbp2,ohci1394 usb_storage 63296 0 ub 18332 0 ohci_hcd 21896 0 uhci_hcd 31376 0 ehci_hcd 31752 0 usbcore 101496 7 usbhid,usb_storage,ub,ohci_hcd,uhci_hcd,ehci_hcd --------------------------------- Thanks Michael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
