On 10:06 Mon 07 Nov , Matt Price wrote: > hi folks, > > in an effort to get acpi workingo n my laptop (THinkpad 600e) I've > upgraded to 2.6.14 kernel. Seemswo work fine! Except I'm having > trouble with my wireless card (D-Link DWL-650+). The third-party > driver compiled andi nstalled fine, but when I insert the card I get > the message: > cs: pcmcia_socket1: cardbus cards are not supported. > Now, I think that I've configured the kernel to support cardbus -- > here's the relevant bits of my config file, as installed by the .deb I > made: > > # Linux kernel version: 2.6.14-suspend2-upstream-p2 > # Sun Nov 6 21:34:11 2005 > # <snip> > # > # Bus options (PCI, PCMCIA, EISA, MCA, ISA) > # > CONFIG_PCI=y > # <snip> > # PCCARD (PCMCIA/CardBus) support > # > CONFIG_PCCARD=m > # CONFIG_PCMCIA_DEBUG is not set > CONFIG_PCMCIA=m > CONFIG_PCMCIA_LOAD_CIS=y > CONFIG_PCMCIA_IOCTL=y > CONFIG_CARDBUS=y > > # > # PC-card bridges > # > CONFIG_YENTA=m > CONFIG_PD6729=m > CONFIG_I82092=m > CONFIG_I82365=m > CONFIG_TCIC=m > CONFIG_PCMCIA_PROBE=y > CONFIG_PCCARD_NONSTATIC=m > > # > # > # Wireless 802.11b Pcmcia/Cardbus cards support > # > CONFIG_PCMCIA_HERMES=m > # CONFIG_PCMCIA_SPECTRUM is not set > CONFIG_AIRO_CS=m > CONFIG_PCMCIA_ATMEL=m > CONFIG_PCMCIA_WL3501=m > > # > # PCMCIA network device support > # > CONFIG_NET_PCMCIA=y > CONFIG_PCMCIA_3C589=m > CONFIG_PCMCIA_3C574=m > CONFIG_PCMCIA_FMVJ18X=m > CONFIG_PCMCIA_PCNET=m > CONFIG_PCMCIA_NMCLAN=m > CONFIG_PCMCIA_SMC91C92=m > CONFIG_PCMCIA_XIRC2PS=m > CONFIG_PCMCIA_AXNET=m > CONFIG_ARCNET_COM20020_CS=m > CONFIG_PCMCIA_IBMTR=m > -------------------- > just about every possible pcmcia option seems to be enabled. ANy > hints as to what I might have done wrong here? Or what the next > debugging step would be? thanks,
I think you have all the necessary CONFIG's, but is the cardmgr daemon running (/etc/init.d/pcmcia)? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
