Paul Puschmann schrieb: > André Wendt wrote: > >>Hello, >> >>I am still running a custom 2.6.10 kernel on a Thinkpad T41p, but >>obviously udev-0.068-2 forces me to update to 2.6.12. As the stock >>kernel linux-image-2.6.12-1-386 does not support CPU freq scaling, I had >>to compile my own kernel again (with the old config). >> >>With the new kernel, however, the screen goes blank immediately after >>GRUB exits, and I do not see anything on my screen until X starts. My >>kernel options are as follows: >> >> /boot/vmlinuz-2.6.12 root=/dev/hda7 ro vga=792 acpi_sleep=s3_bios >> >>which still work fine with 2.6.10. >> >>/var/log/syslog says nothing about radeonfb and/or vesafb which I find >>quite alarming. Also, there is the line >> >> localhost kernel: Boot video device is 0000:01:00.0 >> >>which has not been there before. What's going on here? >> > > Try vga=normal in your grub-options. It seems framebuffer console > doesn't work right.
Yes, but why? It worked before, it should work now... Certainly, I either forgot to add something in the config (which I meant to avoid by using "make oldconfig") or the kernel code has been altered quite a bit. Either way, I don't get it. I wonder if anyone has attempted to install the latest udev in a kernel 2.6.12 or later but is using it in an older version? Best regards, André -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
