Henrique de Moraes Holschuh wrote:
On Tue, 02 Aug 2005, Ivan Glushkov wrote:
I resently got a Wireless DSL Modem (Sinus 1054 DSL). I am now trying to
make my notebook
As long as it is an Intel 2200BG, it *will* work perfectly as long as you:
It works already..
1. Use wpa-supplicant (newest one, maybe from sid)
2. Use the *very latest* version of the kernel drivers and firmware
I use kernel 2.6.12.2, ieee80211-1.0.3, ipw2200-fw-2.3, ipw2200-1.0.6
3. Configure wpa-supplicant correctly, which is your current problem (sorry,
I don't know the correct config either or I'd be attaching it to this
message).
Well, my /etc/wpa_supplicant.conf is:
network={
ssid="MyNet"
scan_ssid=1
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="my_pass"
}
I work, but I wouldn't say perfectly. I do not know why when I try to
download some file, and I monitor the flow with wmnet, I see that the
flow is interupted every 10 sec. Simutaniously wpa_supplicant outputs
messages (which I cannot reproduse in the moment, since I am at work,
and that's all about my home WLAN, I can submit them later if needed),
basically saying that the connection is renewed. Two questions:
1. Is it normal the connection to be interupted/renewed every 10
seconds? How do I get in this case 54Mbit/s?
2. For the moment I must modprobe
eee80211_crypt,
ieee80211,
ieee80211_crypt_wep,
ieee80211_crypt_ccmp,
ieee80211_crypt_tkip
ipw2200
modules manually (if I modprobe only ipw2200 not all of them are
automatically loaded). And at the end I have to start
wpa_supplicant -i eth1 -D ipw
and watch all this output... I can ifcourse redirect that to some .log
file, but that would not be the right thing to do, right? How do I have
to make this right: Everything loaded/started at bootup and giving
proper log messages on a suatable place?
Thanks in advance,
Ivan
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
