Hi, everyone,
First of all, sorry for starting my previous thread by replying to
another mail (by mistake). Secondly, sorry for replying it without
properly displaying sender's name (due to an un-configed mutt. usually,
I send mail through mozilla-mail like now).
Anyway, I think it's better to start a fresh thread. History is
copied as following.
----------------------------------------------------------------------
On Wed, Apr 28, 2004 at 11:57:55PM +0200, Osamu Aoki wrote:
>> Hi,
>>
>> When you post, please do not use reply (especially not to the SPAM)
oops, sorry. hit the wrong button and just proceeded without thinking
>>
>> On Wed, Apr 28, 2004 at 11:43:15PM +0800, Jiele wrote:
>
>>> > Hi, everyone,
>>> > I need some hints on how to let hotplug manage my pcmcia
wireless card.
>
>>
>> Have you read my "Debian Reference"? There Thomas gives good guide.
>>
>>
http://qref.sourceforge.net/Debian/reference/ch-gateway.en.html#s-net-trigger
I will definitely read them.
>>
>
>>> > Until now, I have been using pcmcia-cs package to manage my
Linksys
>>> > pcmcia wireless card. It works great. I use the driver provided
by kernel
>>> > (2.6.4). For pcmcia-cs package, I only use its utilities (e.g.
cardmgr,
>>> > scripts, ...), not the its driver. But since I need hotplug to
manage my usb
>>> > stuff (memory key, mouse), I would love to have hotplug to manage my
>>> > wireless card too!
>
>>
>> Is this cardbus card?
Unfortunately, I think it's a 16-bit PC-Card, because I need to enable
some ISA support (can't remember the exact name) in kernel to use it.
Anyway, it's Linksys WPC11 card "Instant Wireless Network PC Card".
>>
>>
http://qref.sourceforge.net/Debian/reference/ch-gateway.en.html#s-trigger-pcmcia
>>
>
>>> > If I boot my machine without starting pcmcia-cs service, I
won't be able
>>> > to "ifup eth1" (eth0 is the built-in ethernet card), even though
all the
>>> > driver modules are loaded. It complains "No such device". Plug in
and out
>>> > the card, I expect to see some log message by hotplug system at
>>> > /var/log/message, but nothing at all! Now if I run "cardmgr",
eth1 will be
>>> > automatically up. This gives me some confidence that the drivers
are fine.
>>> >
>>> > Here is my question:
>>> >
>>> > 1) Is it possible to get rid of pcmcia-cs package, and let
hotplug to manage
>>> > my card? All the drivers are provided by kernel.
>
>>
>> If cardbus, yes.
Quoted from http://qref.sourceforge.net/Debian/reference/ch-gateway.en.html
For 16 bit ISA PCMCIA network cards:
hotplug / ifupdown with locally disabled /etc/pcmcia/network
(recommended), or
pcmcia-cs / ifupdown with default /etc/pcmcia/network (deprecated), or
pcmcia-cs customized by enabling features of /etc/pcmcia/network
(deprecated)
I would love to have first approach working. And I think I am quite
close now. If I completely disable pcmcia-cs (including cardmgr), when I
insert card, nothing happends. "ifup eth1" says "No such device". If I
run "cardmgr" while disable pcmcia-cs's network config script, after
inserting card, hotplug is able to get notified, and bring up eth1
successfully using /etc/network/interfaces. BTW, all related driver
modules are loaded all the time, and cardmgr won't load any new modules.
So apparently, without cardmgr, the kernel seems fail to bind the driver
(orinoco_cs) to eth1, and then notify hotplug. And cardmgr does something
to bind them. Once eth1 is binded, hotplug can happily manage them. I
tried adding "alias eth1 orinoco_cs" in /etc/modules.conf, doesn't help.
Anything I am missing?
>>
http://qref.sourceforge.net/Debian/reference/ch-kernel.en.html#s-kernel-pcmcia
>>
>
>>> > 2) I suppose kernel will send hotplug system some message when
the card is
>>> > plugged in and out. Is it true? If so, how to get that? FYI, when
I plug in
>>> > and out my usb mouse, hotplug gets called, and related message is
logged
>>> > into /var/log/message.
>
>>
>> Which version are you running? unstable?
testing (sarge).
And thank you for the reply!
