Hi, everyone,
I am running sarge + kernel-2.6.3 on a dell laptop. I successfully
configured ACPI on it. But I still have some small problem. Forgive me
if I am a bit nitpick :)
First of all, here is the related info:
[EMAIL PROTECTED]:~$ cat /proc/acpi/battery/BAT0/state
present: yes
capacity state: ok
charging state: charging
present rate: 37526 mW
remaining capacity: 47070 mWh
present voltage: 16813 mV
[EMAIL PROTECTED]:~$ cat /proc/acpi/battery/BAT0/alarm
alarm: 3000 mWh <------------------------------ (1)
[EMAIL PROTECTED]:~$ cat /proc/acpi/battery/BAT0/info
present: yes
design capacity: 65120 mWh
last full capacity: 65120 mWh
battery technology: rechargeable
design voltage: 14800 mV
design capacity warning: 3000 mWh <------------------------------ (2)
design capacity low: 1000 mWh <------------------------------ (3)
capacity granularity 1: 200 mWh
capacity granularity 2: 200 mWh
model number: LIP8120DLP
serial number: 24671
battery type: LION
OEM info: Sony Corp.
[EMAIL PROTECTED]:~$
As I understand, kernel will generate a battery event only when capacity
drops below 3000mWh as indicated by (1)&(2), and another event when it
drops below 1000mWh. And I had seen the first event, and suppose the
second event will also be emitted, although I had no chance to actually
see it yet.
What i want is to increase both value. 3000mWh is about 5%, and 1000mWh
is about 2%. Both seem a bit too low to me. If I can increase to 10% and
5%, respectively, it would be great!
Anyone knows how to change these two values?
Thanks!
