Thanks Mitch, I'll give that a try. I was wondering: would it would make any difference if I used Tasksel and chose laptop system during the installation. (I skipped over tasksel during my first installation attempt, and now I'm gearing up for a second try.)
Tim Try providing the output of lspci -vv (It can help if you can find the field for the video adapter and post only that). The rage mobility M1 is a mach64 card and it uses the ati driver. Try setting only the native screen resolution for you lcd as a start and not all 640x480, 800x600, 1024x768. Maybe that causes a lockdown since the card doesn't handle this for some reason. If its a 14.1"+ screen its probably 1024x768 with that card. On Thu, 2003-10-02 at 07:42, Tim Folger wrote: >> I don't have much information on the model aside from ati rage mobility >> M/M1/P. I tried the ati and vesa drivers with no luck.I didn't think to >> try the r128 or radeon. Has you had success with those? >> >> Thanks, >> >> Tim >>> > ati rage mobility video adapter. > >> >> What model exactly? >> > >>> > my computer >>> > hung during advanced monitor configuration, on the step where you're >>> > supposed to choose the resolutions your monitor will support. (I > >> checked > >>> > 640x480, 800x600, 1024x768, and left the rest blank.)When I hit > >> "enter" > >>> > to move to the next screen nothing happened and I had to reboot. > >> >> What driver did you choose? ati, r128, radeon? Have you tried "vesa" as >> a >> last-resort alternative? >> >> Regards, >> Frank >> -- >> Frank Trenkamp frank at trenkamp dot org >> GPG fprt: 5A0C 4AE9 74A5 51F0 2D34 E7DC 67FF 32C4 0357 5653 >> -- >> lately on /.: > >>> > My record is 55 hours of straight coding. > >> Followed, no doubt, by six weeks of debugging. >> >> >> -- >> To UNSUBSCRIBE, email to [EMAIL PROTECTED] >> with a subject of "unsubscribe". Trouble? Contact >> [EMAIL PROTECTED] >> >> -- >> Tim -- Micha Feigin [EMAIL PROTECTED] -- Tim Folger
