--- matt zagrabelny <[EMAIL PROTECTED]> escribió: > hello, > > i have a thinkpad t20 with debian installed on it. i am trying to get > the modem working. heres my current situation: > > i have downloaded ltmodem sources from http://ltmodem.heby.de/ and > compiled the modules. this step works, it is when the modules are > installed is where the problem occurs. >
Did you use the ./build_deb script or otherwise install them (the build script would have generated another script that it told you to execute to ensure the modules are autoloaded on boot, but I don't recall the name of the script). > the network and sound modules are not loaded when i try the following: > (note: lt_modem loads correctly) > > zero:~# modprobe lt_serial > /lib/modules/2.4.20/ltmodem/lt_serial.o: init_module: No such device > Hint: insmod errors can be caused by incorrect module parameters, > including invalid IO or IRQ parameters. > You may find more information in syslog or the output from dmesg > /lib/modules/2.4.20/ltmodem/lt_serial.o: insmod > /lib/modules/2.4.20/ltmodem/lt_serial.o failed > /lib/modules/2.4.20/ltmodem/lt_serial.o: insmod lt_serial failed > What is the output of 'ls -l /dev/ttyLT*' ? > zero:~#dmesg > <snip> > Loading Lucent Modem Controller driver version 8.26 > PCI: Found IRQ 11 for device 00:03.0 > PCI: Sharing IRQ 11 with 00:03.1 > 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html > 00:03.0: 3Com PCI 3c556B Laptop Hurricane at 0x1800. Vers LK1.1.16 > > output from lspci for video, audio, network, modem, and cardbus bridge > report that all the above devices are sharing a pin and an IRQ > > zero:~#lspci -vv > <snip> > Interrupt: pin A routed to IRQ 11 > <snip> > > this interrupt line is the same for all the afformentioned devices. > how can all of these devices be sharing the same pin and IRQ? does this > make sense to anyone? > >From my experience this is normal in laptops becuase of the way the connection to the PCI bus is bridged. > anyhow back to the problem at hand. i am rapidly running out of ideas to > get the lt_serial module loaded correctly. > > anyone with any ideas please help. > > thanks, > matt zagrabelny > > -Roberto Sanchez > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > ___________________________________________________ Yahoo! Messenger - Nueva versión GRATIS Super Webcam, voz, caritas animadas, y más... http://messenger.yahoo.es
