Am Mon, 2003-04-28 um 16.48 schrieb ben: Please send me your whole cdrecord line you are using
Hi, Hopefully this isn't the 3rd email you have got on this, hotmail doesn't seem to be sending, but knowing micro$oft it probably is. anyway, third time lucky, this time with minotaur/mozilla.. I have only tried using xcdroast at this stage, but I believe that uses cdrecord anyway.. could you send me an example of what I would use as command from console? XCDroast gives this in the log: Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORD dev=0,0,0 gracetime=2 fs=1024k -v driveropts=burnfree speed=8 -eject -multi -pad tsize=255159s - # I presume this is the command? scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 Cdrecord 2.01a07 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling TOC Type: 3 = CD-ROM XA mode 2 Using libscg version 'schily-0.7' Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'TOSHIBA ' Identifikation : 'DVD-ROM SD-R2102' Revision : '1715' Device seems to be: Generic mmc2 DVD-ROM. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R Drive buf size : 1312768 = 1282 KB FIFO size : 1048576 = 1024 KB Track 01: data 498 MB padsize: 30 KB Total size: 572 MB (56:42.34) = 255176 sectors Lout start: 572 MB (56:44/26) = 255176 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type A, low Beta category (A-) (2) ATIP start of lead in: -11634 (97:26/66) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 104673 Starting to write CD/DVD at speed 8 in real TAO mode for multi session. # the following seems to be the error: cdrecord: Premature EOF on stdin. Waiting for reader process to fill input buffer ... cdrecord: Input buffer error, aborting. input buffer ready. cdrecord: fifo had 1 puts and 0 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. thanks for your help! Ben.
