Dear Franzi,
Yes, the driver does work with kernel 2.2.20.
I am using a pretty-much default installation of Woody (22 July 02) on a
ThinkPad770 with a 3com FEM656 CardBus LAN/modem. I found that if I ran
dmesg just after boot, it showed that the 3c575 driver was installed and
running, but the kernel could not mount the card because it was "out of
resource," which meant that I needed to allocate an additional IO memory
range for the card.
Since I am not a powerpenguin I could not figure this out, so I wrote to
Dave Hinds, the author of the PCMCIA-HOWTO. His reply fixed the
problem. I sent part of the dmesg output to him,
cs: could not allocate 512 IO ports for CardBus
and he responded:
Edit /etc/pcmcia/config.opts and add a line like:
include port 0x1000-0x1fff
This error is actually one of the things covered in the PCMCIA-HOWTO in the
troubleshooting section, I think.
-- Dave
He may be right, but I have not yet found the place where the fix is
described.
Hope this helps.
Pietro
franzi wrote:
Hi to everyone is it true that the driver 3c575_cb works only in Kernel
2.4 up i've got a pcmcia 3ccfe575bt ina laptop extensa 390 with 2.2.20
kernel;what i've to do to get it on?
BYE
