On Tue, Sep 17, 2002 at 09:45:02AM -0700, Bob Nielsen wrote: > On Tue, Sep 17, 2002 at 10:56:35AM -0100, Werner Heuser wrote: > > > I have a Compaq Presario 1070 with an Intel Pro/100 (not M, but > > > possibly similar) Cardbus II card and have also not found a driver > > .. > > > > I just bought a Toshiba Satellite 1405-s151 laptop, > > > > which includes an intel pro/100 M LAN card. Which > > .. > > > > Both cards are mentioned as supported at > > http://www.intel.com/support/network/adapter/1000/linux/e100.htm > > also there is the Debian e100 package available for this cards. > > > > My experience with this type of cards and drivers under Linux are > > good. Please include a better description of the problem in your > > questions. Why exactly didn't the driver work? Error messages? > > Version? ... > > I never could find the right driver. Searching on the Intel site for > the "Pro/100 Cardbus II" only led me to Windows, etc. drivers. > Following your message, I was able to find the e100 driver on the Intel > web site (searching for a driver for the "Pro/100 M" does show this > driver). I couldn't find any Debian package on either the Intel or Debian > sites. > > I'll give it a try, in any case. Thanks.
I had no luck with the e100, so sent an email to Intel support. They replied that the card was supported by the eepro100_cb.o module, which is included in the pcmcia-source package. I compiled and can load the module, but am still not getting the interface bound to eth0: #ifconfig eth0 up eth0: ERROR while getting interface flags: No such device Bob
