Hello, I have a problem with my pcmcia drivers on Woody/kernel 2.4.17-686. I installed the pcmcia-cs package, but not the pcmcia modules, since they were already included in the kernel. I know I have an i82365 chip, at least that always used to work before on various installations. With the old 2.2.20 kernel pcmcia works fine, but when I switch to 2.4.17, the module i82365 cant be installed/no such device. (tcic doesnt work either). The solution I found so far is to load the module yenta_socket on startup (/etc/modules) and in /etc/default/pcmcia I have pcic=i82092. Now the drivers for my pcmcia networking card and pcmcia scsi card are loaded on startup and everything runs fine lateron, but on bootup I get the error message:
lib/modules/2.4.17-686/kernel/drivers/pcmcia/i82092.o will taint the kernel: no license Any ideas how I can correct this? How can I use i82365 again? That should be the correct module not i82092. Thanks in advance, Marc /etc/default/pcmcia: # Defaults for pcmcia (sourced by /etc/init.d/pcmcia) PCMCIA=yes PCIC=i82092 PCIC_OPTS= CORE_OPTS= CARDMGR_OPTS= -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
